B&C 12 NDL 88
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 51 Hz |
| Qts | 0.274 |
| Qes | 0.29 |
| Qms | 5 |
| Vas | 52 L |
| Sd | 522 cm² |
| Xmax | 5.7 mm |
| Re | 5 Ω |
| Bl | 19.9 T·m |
| Mms | 71.5 g |
| Pe | 700 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 176 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 12NDL88 | 51 = | 0.27 = | 52 = | 8 +2.3 | 98 +0.2 | close | + | |
| Oberton 12MB35 | 51.43 +0.43 | 0.267 -0.01 | 50.07 -1.93 | 6.75 +1.05 | 98 +0.2 | close | + | |
| Beyma 12MCB700 | 51 = | 0.27 = | 59.5 +7.5 | 7 +1.3 | 98 +0.2 | close | + | |
| Fane Colossus 12MB | 55 +4 | 0.286 +0.01 | 56 +4 | 5.5 -0.2 | 98 +0.2 | close | 500 W vs 700 W: lower power handling · Xmax 5.5 mm < 5.7 mm: lower excursion-limited SPL | + |
| Faital PRO 12FH520-4 | 50 -1 | 0.268 -0.01 | 57 +5 | 5.8 +0.1 | 99.9 +2.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 12FL76 | 50 -1 | 0.3 +0.03 | 57 +5 | 6 +0.3 | 97.5 -0.3 | close | 400 W vs 700 W: lower power handling | + |
| 18 Sound 12NTLW2500 | 52 +1 | 0.31 +0.04 | 52.7 +0.7 | 7.6 +1.9 | 97.5 -0.3 | close | 4 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| 18 Sound 12W750 | 55 +4 | 0.27 = | 58 +6 | 7 +1.3 | 97 -0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 12LW800 | 52 +1 | 0.29 +0.02 | 48 -4 | 6.5 +0.8 | 96 -1.8 | close | 500 W vs 700 W: lower power handling | + |
| B&C 12CLA76 | 52 +1 | 0.25 -0.02 | 56 +4 | 5.3 -0.4 | 98.5 +0.7 | close | 350 W vs 700 W: lower power handling · Xmax 5.3 mm < 5.7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 12 NDL 88 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.