B&C 12 CXN 88
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50 Hz |
| Qts | 0.224 |
| Qes | 0.23 |
| Qms | 8.3 |
| Vas | 59 L |
| Sd | 522 cm² |
| Xmax | 4 mm |
| Re | 5 Ω |
| Bl | 21.2 T·m |
| Mms | 65.6 g |
| Pe | 500 W |
| Sensitivity | 99.1 dB |
Alignment hint
| EBP | 217 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 12 CL 76 | 48 -2 | 0.21 -0.01 | 59 = | 3.8 -0.2 | 98.6 -0.5 | close | 350 W vs 500 W: lower power handling · Xmax 3.8 mm < 4 mm: lower excursion-limited SPL | + |
| Beyma 12MC700Nd | 51 +1 | 0.24 +0.02 | 58 -1 | 7 +3 | 99 -0.1 | close | + | |
| B&C 12CL76 | 48 -2 | 0.21 -0.01 | 59 = | 6 +2 | 98.5 -0.6 | close | 350 W vs 500 W: lower power handling | + |
| Monacor SP-30A/300NEO | 52 +2 | 0.239 +0.01 | 60 +1 | 3.5 -0.5 | 99.2 +0.1 | close | 300 W vs 500 W: lower power handling · Xmax 3.5 mm < 4 mm: lower excursion-limited SPL | + |
| B&C 12 CLA 76 | 52 +2 | 0.247 +0.02 | 56 -3 | 3.9 -0.1 | 98.7 -0.4 | close | 350 W vs 500 W: lower power handling · Xmax 3.9 mm < 4 mm: lower excursion-limited SPL | + |
| Beyma 12"P80/Fe V2 | 48 -2 | 0.21 -0.01 | 61 +2 | 7.5 +3.5 | 99 -0.1 | close | + | |
| P.Audio BM-12CX38 | 48 -2 | 0.221 = | 72.9 +13.9 | 4.5 +0.5 | 99.3 +0.2 | close | + | |
| Monacor SP-30A/250PA | 52 +2 | 0.239 +0.01 | 62 +3 | 3.4 -0.6 | 99.1 = | close | 250 W vs 500 W: lower power handling · Xmax 3.4 mm < 4 mm: lower excursion-limited SPL | + |
| B&C 12 PLB 76 | 50 = | 0.229 +0.01 | 75 +16 | 4.4 +0.4 | 99.7 +0.6 | close | 350 W vs 500 W: lower power handling | + |
| B&C 12PLB76 | 50 = | 0.23 +0.01 | 75 +16 | 5 +1 | 99 -0.1 | close | 350 W vs 500 W: lower power handling | + |
Compare the closest 3 against the 12 CXN 88 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.