B&C 10NW76
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 68 Hz |
| Qts | 0.29 |
| Qes | 0.3 |
| Qms | 8.7 |
| Vas | 18.5 L |
| Sd | 320 cm² |
| Xmax | 7 mm |
| Re | 10 Ω |
| Bl | 24.7 T·m |
| Mms | 42.5 g |
| Pe | 400 W |
| Sensitivity | 96.8 dB |
Alignment hint
| EBP | 227 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 3.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10CLA76 | 71 +3 | 0.29 = | 16.4 -2.1 | 6.5 -0.5 | 96.5 -0.3 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| B&C 10NW76 | 67 -1 | 0.26 -0.03 | 17.6 -0.9 | 6.8 -0.2 | 96.5 -0.3 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 6.8 mm < 7 mm: lower excursion-limited SPL | + |
| Beyma 10MC500 | 65 -3 | 0.29 = | 24 +5.5 | 8 +1 | 97 +0.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 10NTLW2500 | 65 -3 | 0.33 +0.04 | 21 +2.5 | 7.6 +0.6 | 96.5 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 10FH520 | 60 -8 | 0.29 = | 23.5 +5 | 7.25 +0.25 | 97 +0.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 10NDL88 | 67 -1 | 0.32 +0.03 | 15.6 -2.9 | 7.8 +0.8 | 95.5 -1.3 | close | + | |
| B&C 10NDL88 | 61 -7 | 0.25 -0.04 | 18.4 -0.1 | 8.1 +1.1 | 96 -0.8 | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 10NTLW2500 | 61 -7 | 0.27 -0.02 | 22 +3.5 | 7.6 +0.6 | 96.5 -0.3 | close | 4 Ω vs 16 Ω: amp load changes | + |
| Beyma 10MCS 500 | 65 -3 | 0.31 +0.02 | 24 +5.5 | 8 +1 | 96.5 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| LaVoce WAN103.01-16 | 70 +2 | 0.28 -0.01 | 21.5 +3 | 5 -2 | 98 +1.2 | usable | Xmax 5 mm < 7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10NW76 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.