B&C 10MD26
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 76 Hz |
| Qts | 0.21 |
| Qes | 0.22 |
| Qms | 4.8 |
| Vas | 20 L |
| Sd | 320 cm² |
| Xmax | 1.5 mm |
| Re | 5.8 Ω |
| Bl | 19.6 T·m |
| Mms | 31 g |
| Pe | 350 W |
| Sensitivity | 100 dB |
Alignment hint
| EBP | 345 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10 MD 26 | 76 = | 0.21 = | 20 = | 1.5 = | 99.4 -0.6 | close | + | |
| Oberton 10NM300 | 71.36 -4.64 | 0.209 = | 20.61 +0.61 | 5.25 +3.75 | 100 = | close | + | |
| PD PDN 10MH25 | 79.7 +3.7 | 0.221 +0.01 | 18 -2 | 2.4 +0.9 | 99.3 -0.7 | close | + | |
| Precision Devices PDN 10MH25 | 79.7 +3.7 | 0.221 +0.01 | 18 -2 | 2.4 +0.9 | 99.3 -0.7 | close | + | |
| PHL Audio 3860 v2014 | 86 +10 | 0.211 = | 21 +1 | 1.9 +0.4 | 102 +2 | close | 250 W vs 350 W: lower power handling | + |
| B&C 10 NW 76 4 Ohms | 67 -9 | 0.194 -0.02 | 17.8 -2.2 | 3 +1.5 | 100.5 +0.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| LaVoce WAN103.01 | 70 -6 | 0.22 +0.01 | 22.29 +2.29 | 5 +3.5 | 99 -1 | usable | + | |
| Altec 425-8H-II | 73.9 -2.1 | 0.234 +0.02 | 25.8 +5.8 | 1.3 -0.2 | 99.6 -0.4 | usable | 60 W vs 350 W: lower power handling · Xmax 1.3 mm < 1.5 mm: lower excursion-limited SPL | + |
| Beyma 10MI100 | 89 +13 | 0.251 +0.04 | 20 = | 2.5 +1 | 100.4 +0.4 | usable | + | |
| PHL Audio 3860NdM | 90 +14 | 0.231 +0.02 | 16.3 -3.7 | 1.8 +0.3 | 100.4 +0.4 | usable | 250 W vs 350 W: lower power handling | + |
Compare the closest 3 against the 10MD26 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.