B&C 10CL64
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 63 Hz |
| Qts | 0.31 |
| Qes | 0.33 |
| Qms | 5.1 |
| Vas | 22.2 L |
| Sd | 320 cm² |
| Xmax | 5.2 mm |
| Re | 5.3 Ω |
| Bl | 16.3 T·m |
| Mms | 41.6 g |
| Pe | 250 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 191 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10CXN64 | 68 +5 | 0.31 = | 23 +0.8 | 5.5 +0.3 | 95.2 -0.8 | close | + | |
| Beyma 10MCS 500 | 65 +2 | 0.31 = | 24 +1.8 | 8 +2.8 | 96.5 +0.5 | close | + | |
| Sica 10 K 4 PL | 62.5 -0.5 | 0.31 = | 19.5 -2.7 | 5 -0.2 | 94.9 -1.1 | close | Xmax 5 mm < 5.2 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH520 | 60 -3 | 0.32 +0.01 | 22.7 +0.5 | 7.25 +2.05 | 95 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 10NTLW2500 | 65 +2 | 0.33 +0.02 | 21 -1.2 | 7.6 +2.4 | 96.5 +0.5 | close | + | |
| Faital PRO 10FH520 | 60 -3 | 0.29 -0.02 | 23.5 +1.3 | 7.25 +2.05 | 97 +1 | close | + | |
| Beyma 10MC500 | 65 +2 | 0.29 -0.02 | 24 +1.8 | 8 +2.8 | 97 +1 | close | + | |
| 18 Sound 10NTLW2500 | 61 -2 | 0.27 -0.04 | 22 -0.2 | 7.6 +2.4 | 96.5 +0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 10NW64 | 59 -4 | 0.26 -0.05 | 22 -0.2 | 6 +0.8 | 96 = | close | + | |
| LaVoce WAN103.01-16 | 70 +7 | 0.28 -0.03 | 21.5 -0.7 | 5 -0.2 | 98 +2 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 5.2 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10CL64 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.