B&C 10 NW 76 8 Ohms
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 67 Hz |
| Qts | 0.261 |
| Qes | 0.27 |
| Qms | 7.8 |
| Vas | 17.6 L |
| Sd | 320 cm² |
| Xmax | 3.4 mm |
| Re | 5.5 Ω |
| Bl | 19.9 T·m |
| Mms | 46 g |
| Pe | 400 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 248 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 2.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10NW76 | 67 = | 0.26 = | 17.6 = | 6.8 +3.4 | 96.5 = | close | + | |
| B&C 10NW76 | 68 +1 | 0.29 +0.03 | 18.5 +0.9 | 7 +3.6 | 96.8 +0.3 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 10 NW 76 16 Ohms | 68 +1 | 0.29 +0.03 | 18.5 +0.9 | 3.5 +0.1 | 93.9 -2.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 10NDL88 | 61 -6 | 0.25 -0.01 | 18.4 +0.8 | 8.1 +4.7 | 96 -0.5 | close | + | |
| B&C 10CLA76 | 71 +4 | 0.29 +0.03 | 16.4 -1.2 | 6.5 +3.1 | 96.5 = | close | + | |
| Monacor SP-10/500FH | 60 -7 | 0.258 = | 21.6 +4 | 4.5 +1.1 | 96.2 -0.3 | close | + | |
| Beyma 10MC700ND v2019 | 63 -4 | 0.226 -0.04 | 20 +2.4 | 4.2 +0.8 | 97 +0.5 | close | + | |
| LaVoce WAN103.01-16 | 70 +3 | 0.28 +0.02 | 21.5 +3.9 | 5 +1.6 | 98 +1.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| B&C 10NW64 | 59 -8 | 0.26 = | 22 +4.4 | 6 +2.6 | 96 -0.5 | usable | 300 W vs 400 W: lower power handling | + |
| B&C 10 MBX 64 | 65 -2 | 0.262 = | 26 +8.4 | 3.7 +0.3 | 97.8 +1.3 | usable | + |
Compare the closest 3 against the 10 NW 76 8 Ohms →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.