B&C 10 NW 64
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50 Hz |
| Qts | 0.255 |
| Qes | 0.27 |
| Qms | 4.5 |
| Vas | 27.5 L |
| Sd | 320 cm² |
| Xmax | 4.3 mm |
| Re | 5.2 Ω |
| Bl | 17.9 T·m |
| Mms | 52.9 g |
| Pe | 300 W |
| Sensitivity | 94.9 dB |
Alignment hint
| EBP | 185 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PHL Audio 3490 | 54 +4 | 0.258 = | 28 +0.5 | 4.2 -0.1 | 96.9 +2 | close | Xmax 4.2 mm < 4.3 mm: lower excursion-limited SPL | + |
| Beyma 10LW30/N v2017 | 55 +5 | 0.29 +0.03 | 28 +0.5 | 5.1 +0.8 | 95 +0.1 | close | + | |
| B&C 10 NDL 64 | 56 +6 | 0.267 +0.01 | 31 +3.5 | 4 -0.3 | 96.2 +1.3 | close | Xmax 4 mm < 4.3 mm: lower excursion-limited SPL | + |
| B&C 10NDL64 | 56 +6 | 0.26 +0.01 | 31 +3.5 | 6 +1.7 | 97 +2.1 | close | + | |
| PHL Audio 3420 | 53 +3 | 0.256 = | 35 +7.5 | 4.3 = | 97.6 +2.7 | close | + | |
| Faital PRO 10FH500 | 60 +10 | 0.26 +0.01 | 25.8 -1.7 | 7.5 +3.2 | 96 +1.1 | close | + | |
| PHL Audio 3411 | 47 -3 | 0.23 -0.02 | 35.1 +7.6 | 4.9 +0.6 | 95.3 +0.4 | usable | + | |
| 18 Sound 10NTLW2000 | 58 +8 | 0.27 +0.02 | 35.4 +7.9 | 4.4 +0.1 | 95 +0.1 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Volt B250.2 PA | 50 = | 0.314 +0.06 | 33 +5.5 | 4.6 +0.3 | 94.4 -0.5 | usable | + | |
| SICA 10 K 3 PL 4 Ohms | 56 +6 | 0.265 +0.01 | 29.2 +1.7 | 4 -0.3 | 98.9 +4 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 4 mm < 4.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10 NW 64 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.