B&C 10 MBX 64
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 65 Hz |
| Qts | 0.262 |
| Qes | 0.28 |
| Qms | 4 |
| Vas | 26 L |
| Sd | 346 cm² |
| Xmax | 3.7 mm |
| Re | 5.4 Ω |
| Bl | 17.5 T·m |
| Mms | 38.7 g |
| Pe | 350 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 232 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10MBX64 | 65 = | 0.26 = | 28 +2 | 4 +0.3 | 100 +2.2 | close | + | |
| B&C 10FW64 | 63 -2 | 0.23 -0.03 | 27 +1 | 5 +1.3 | 98 +0.2 | close | 250 W vs 350 W: lower power handling | + |
| Faital PRO 10HX240 | 65 = | 0.275 +0.01 | 31.8 +5.8 | 3.5 -0.2 | 98.4 +0.6 | close | 250 W vs 350 W: lower power handling · Xmax 3.5 mm < 3.7 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH500 | 60 -5 | 0.26 = | 25.8 -0.2 | 7.5 +3.8 | 96 -1.8 | close | + | |
| Oberton 10MB300 | 64.7 -0.3 | 0.244 -0.02 | 22.75 -3.25 | 5.25 +1.55 | 99 +1.2 | close | + | |
| SICA 10 K 3 PL 4 Ohms | 56 -9 | 0.265 = | 29.2 +3.2 | 4 +0.3 | 98.9 +1.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| PHL Audio 3490 | 54 -11 | 0.258 = | 28 +2 | 4.2 +0.5 | 96.9 -0.9 | close | + | |
| Beyma 10MC500 | 65 = | 0.29 +0.03 | 24 -2 | 8 +4.3 | 97 -0.8 | close | + | |
| 18 Sound 10NMB420 vp | 67.3 +2.3 | 0.272 +0.01 | 33 +7 | 4 +0.3 | 99.2 +1.4 | close | + | |
| Monacor SP-10/500FH | 60 -5 | 0.258 = | 21.6 -4.4 | 4.5 +0.8 | 96.2 -1.6 | close | + |
Compare the closest 3 against the 10 MBX 64 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.