B&C 10 FCX 64
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 63 Hz |
| Qts | 0.417 |
| Qes | 0.44 |
| Qms | 7.9 |
| Vas | 25 L |
| Sd | 320 cm² |
| Xmax | 4.4 mm |
| Re | 5.5 Ω |
| Bl | 13.5 T·m |
| Mms | 36.6 g |
| Pe | 250 W |
| Sensitivity | 95.1 dB |
Alignment hint
| EBP | 143 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 13.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce WAF102.52 | 66 +3 | 0.412 -0.01 | 23.5 -1.5 | 4.5 +0.1 | 96 +0.9 | close | + | |
| 18 Sound 10W650 | 64 +1 | 0.41 -0.01 | 27 +2 | 5.7 +1.3 | 96 +0.9 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FH520 | 65 +2 | 0.41 -0.01 | 22.7 -2.3 | 7 +2.6 | 96 +0.9 | close | 16 Ω vs 8 Ω: amp load changes | + |
| BMS 10C262 | 65 +2 | 0.368 -0.05 | 25.5 +0.5 | 5.1 +0.7 | 95.7 +0.6 | close | + | |
| Jensen SMOOTH BS 10N/250A | 58 -5 | 0.429 +0.01 | 30.9 +5.9 | 4.7 +0.3 | 95.1 = | close | + | |
| Celestion BN10-300X(4) | 64.2 +1.2 | 0.43 +0.01 | 29.2 +4.2 | 4 -0.4 | 93.8 -1.3 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 250 W: lower power handling · Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
| Celestion PULSE 10 | 68 +5 | 0.439 +0.02 | 25.8 +0.8 | 3.4 -1 | 95.1 = | close | Xmax 3.4 mm < 4.4 mm: lower excursion-limited SPL | + |
| LaVoce FBASS10-18 | 65 +2 | 0.43 +0.01 | 32.4 +7.4 | 4.5 +0.1 | 96 +0.9 | close | 150 W vs 250 W: lower power handling | + |
| Celestion BN10-300X | 64.2 +1.2 | 0.432 +0.02 | 29.2 +4.2 | 4 -0.4 | 96.9 +1.8 | close | Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
| Celestion BN10-300X8 | 64.3 +1.3 | 0.382 -0.03 | 28.8 +3.8 | 4 -0.4 | 95.8 +0.7 | close | Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10 FCX 64 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.