B&C 10 CLX 64
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 70 Hz |
| Qts | 0.627 |
| Qes | 0.67 |
| Qms | 9.8 |
| Vas | 21 L |
| Sd | 320 cm² |
| Xmax | 2.3 mm |
| Re | 5.6 Ω |
| Bl | 11.4 T·m |
| Mms | 35.3 g |
| Pe | 70 W |
| Sensitivity | 93.8 dB |
Alignment hint
| EBP | 104 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 77.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Monacor SP-10A/250NEO | 80 +10 | 0.635 +0.01 | 19 -2 | 3 +0.7 | 95.1 +1.3 | close | + | |
| Celestion BL10-100X | 74.4 +4.4 | 0.532 -0.09 | 25.1 +4.1 | 3.5 +1.2 | 93.8 = | usable | + | |
| Celestion BL10-200X | 73 +3 | 0.48 -0.15 | 22.74 +1.74 | 4 +1.7 | 93.8 = | usable | + | |
| RCF L10CX1AK | 67.9 -2.1 | 0.59 -0.04 | 33 +12 | 3 +0.7 | 93.6 -0.2 | usable | + | |
| LaVoce FBASS10-18-16 | 70 = | 0.57 -0.06 | 28.39 +7.39 | 4.8 +2.5 | 95 +1.2 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Celestion BL 10-100 | 70 = | 0.608 -0.02 | 33 +12 | 3.3 +1 | 95.7 +1.9 | usable | + | |
| Tannoy DC200 | 66.5 -3.5 | 0.607 -0.02 | 25.8 +4.8 | 1.6 -0.7 | 92 -1.8 | usable | 40 W vs 70 W: lower power handling · Xmax 1.6 mm < 2.3 mm: lower excursion-limited SPL | + |
| Celestion BL10-100 | 85.9 +15.9 | 0.587 -0.04 | 25.8 +4.8 | 2.5 +0.2 | 97.3 +3.5 | usable | + | |
| Peerless FSL-1015R02-08 | 68.4 -1.6 | 0.616 -0.01 | 37.7 +16.7 | 2.2 -0.1 | 95.9 +2.1 | usable | Xmax 2.2 mm < 2.3 mm: lower excursion-limited SPL | + |
| Celestion TF 1018 | 79.8 +9.8 | 0.527 -0.1 | 23.8 +2.8 | 2 -0.3 | 96.3 +2.5 | usable | Xmax 2 mm < 2.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10 CLX 64 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.