Axon 10K01
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 25 Hz |
| Qts | 0.286 |
| Qes | 0.33 |
| Qms | 2.16 |
| Vas | 104.6 L |
| Sd | 353 cm² |
| Xmax | 7 mm |
| Re | 3.2 Ω |
| Bl | 10.2 T·m |
| Mms | 67.7 g |
| Pe | 125 W |
| Sensitivity | 92.9 dB |
Alignment hint
| EBP | 76 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| HiVi S10IIP | 27 +2 | 0.287 = | 98.1 -6.5 | 7 = | 92.9 = | close | 8 Ω vs 4 Ω: amp load changes | + |
| Vifa M26WR09-04 | 27 +2 | 0.28 -0.01 | 113 +8.4 | 6.5 -0.5 | 93 +0.1 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| Visaton GF 250 | 26 +1 | 0.289 = | 110 +5.4 | 8.3 +1.3 | 96.9 +4 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Audiotechnology 10C772510KAP | 25 = | 0.24 -0.05 | 110 +5.4 | 8.6 +1.6 | 92.1 -0.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Focal 10K 6411 | 28.3 +3.3 | 0.291 +0.01 | 124.1 +19.5 | 8 +1 | 93.6 +0.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Audiotechnology 10B773010KA | 24.4 -0.6 | 0.283 = | 128 +23.4 | 9.8 +2.8 | 91 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Peerless XXLS-835016 | 22.4 -2.6 | 0.315 +0.03 | 94.4 -10.2 | 7.1 +0.1 | 91.9 -1 | close | + | |
| Monacor SPH-275C | 31 +6 | 0.287 = | 100 -4.6 | 6 -1 | 93.1 +0.2 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| Dayton Audio RS270P-4A | 22.9 -2.1 | 0.272 -0.01 | 110.5 +5.9 | 6 -1 | 91 -1.9 | close | Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| Peerless XXLS-830951 | 21 -4 | 0.308 +0.02 | 103 -1.6 | 10.1 +3.1 | 91.6 -1.3 | close | + |
Compare the closest 3 against the 10K01 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.