← all drivers

Audio System HX10 SQ

10" · 4 Ω · 350 W · 83.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs27.6 Hz
Qts0.39
Qes0.41
Qms7.8
Vas31.5 L
Sd327 cm²
Xmax11.75 mm
Re3.2 Ω
Bl13.77 T·m
Mms140 g
Pe350 W
Sensitivity83.9 dB

Alignment hint

EBP67 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 13.8 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Polk Audio DB10 (OLD) 26.7 -0.90.376 -0.0131.998 +0.58.7 -3.0583.6 -0.3closeXmax 8.7 mm < 11.75 mm: lower excursion-limited SPL+
Infinity KAPPA PERFECT 10.128.35 +0.750.42 +0.0338.511 +7.0114.15 +2.484.8 +0.9close+
JL Audio 10W6V2-D428.5 +0.90.469 +0.0833.4 +1.911.9 +0.1584.9 +1close8 Ω vs 4 Ω: amp load changes+
Infinity 1030W29.62 +2.020.39 =35.72 +4.2212.25 +0.588 +4.1close250 W vs 350 W: lower power handling+
Infinity REFERENCE 1060W29 +1.40.42 +0.0332.9 +1.413.0048 +1.2588 +4.1close275 W vs 350 W: lower power handling+
Infinity KAPPA 1000W30.5 +2.90.37 -0.0227 -4.510.25 -1.584.6 +0.7close2 Ω vs 4 Ω: amp load changes · Xmax 10.25 mm < 11.75 mm: lower excursion-limited SPL+
Wavecor SW263WA0327 -0.60.47 +0.0828 -3.512 +0.2582.3 -1.6usable100 W vs 350 W: lower power handling+
Dayton Audio RSS265HO-4 v201526.9 -0.70.356 -0.0329.4 -2.19.3 -2.4587.2 +3.3usableXmax 9.3 mm < 11.75 mm: lower excursion-limited SPL+
JL Audio 10W3V3-431.5 +3.90.485 +0.0932.23 +0.7314 +2.2584.87 +0.97usable+
Dayton Audio UM10-22 1026.2 -1.40.458 +0.0735.1 +3.610.9 -0.8586.9 +3usableXmax 10.9 mm < 11.75 mm: lower excursion-limited SPL+

Compare the closest 3 against the HX10 SQ →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.