Audax PR330T2 4 Ohms
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 46.8 Hz |
| Qts | 0.354 |
| Qes | 0.45 |
| Qms | 1.65 |
| Vas | 80.1 L |
| Sd | 538 cm² |
| Xmax | 3.4 mm |
| Re | 2.7 Ω |
| Bl | 10.2 T·m |
| Mms | 58.6 g |
| Pe | 150 W |
| Sensitivity | 99.3 dB |
Alignment hint
| EBP | 104 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 26.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 12 L1 2.5 SL | 47.5 +0.7 | 0.36 +0.01 | 81.8 +1.7 | 3.7 +0.3 | 97.3 -2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence DELTA PRO 12A | 51 +4.2 | 0.35 = | 81.7 +1.6 | 4.6 +1.2 | 99.2 -0.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| SICA PL 12 B 3 S | 46.7 -0.1 | 0.356 = | 79.3 -0.8 | 5.5 +2.1 | 97.1 -2.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence DELTA PRO 12 | 51 +4.2 | 0.353 = | 81.7 +1.6 | 3.2 -0.2 | 98.1 -1.2 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 3.2 mm < 3.4 mm: lower excursion-limited SPL | + |
| Faital PRO 12PR300 v2015 | 50 +3.2 | 0.357 = | 79.2 -0.9 | 4.9 +1.5 | 98 -1.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 12 FCX 76 | 47 +0.2 | 0.339 -0.01 | 82 +1.9 | 5 +1.6 | 97.6 -1.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| RCF MB 12N251 | 50 +3.2 | 0.338 -0.02 | 83 +2.9 | 5 +1.6 | 98.5 -0.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence DELTA PRO 12 A | 51 +4.2 | 0.353 = | 81.7 +1.6 | 6.2 +2.8 | 98.1 -1.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence DELTA PRO 12 A vp | 51 +4.2 | 0.353 = | 81.7 +1.6 | 6.2 +2.8 | 98.1 -1.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| SICA 12 E 2 CS Z007660 | 47.5 +0.7 | 0.364 +0.01 | 76.9 -3.2 | 4 +0.6 | 95.8 -3.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the PR330T2 4 Ohms →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.