Audax PR300 MO AP
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 25 Hz |
| Qts | 0.468 |
| Qes | 0.527 |
| Qms | 4.2 |
| Vas | 457 L |
| Sd | 510 cm² |
| Xmax | 4.4 mm |
| Re | 6.8 Ω |
| Bl | 8.1 T·m |
| Mms | 32.3 g |
| Pe | 100 W |
| Sensitivity | 94 dB |
Alignment hint
| EBP | 47 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 356.2 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion T1600 vp 1 | 23.6 -1.4 | 0.463 -0.01 | 350 -107 | 4 -0.4 | 92.2 -1.8 | usable | Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
| Davis 31TK12-M vp | 27.8 +2.8 | 0.416 -0.05 | 376 -81 | 5 +0.6 | 94.5 +0.5 | usable | + | |
| Audax LFH507 | 20 -5 | 0.483 +0.01 | 513.5 +56.5 | 4.5 +0.1 | 92 -2 | usable | + | |
| Realistic 40-1025 | 21.5 -3.5 | 0.452 -0.02 | 526 +69 | 11.4 +7 | 93.3 -0.7 | usable | + | |
| Ciare HW320 | 27 +2 | 0.445 -0.02 | 293 -164 | 4.1 -0.3 | 93.4 -0.6 | usable | Xmax 4.1 mm < 4.4 mm: lower excursion-limited SPL | + |
| Max Speaker PV-1230 4 Ohms | 20 -5 | 0.452 -0.02 | 317 -140 | 4 -0.4 | 93.4 -0.6 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
| Davis 31ST12M v2009 | 22 -3 | 0.39 -0.08 | 398 -59 | 9 +4.6 | 91.8 -2.2 | usable | + | |
| Cabasse 30BZ24 vp oriu1 | 30.3 +5.3 | 0.394 -0.07 | 363 -94 | 4 -0.4 | 94.6 +0.6 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
| JBL 125A | 25 = | 0.433 -0.04 | 235 -222 | 4.8 +0.4 | 92.9 -1.1 | usable | 50 W vs 100 W: lower power handling | + |
| JBL 127A | 25 = | 0.433 -0.04 | 235 -222 | 4.8 +0.4 | 92.9 -1.1 | usable | 50 W vs 100 W: lower power handling | + |
Compare the closest 3 against the PR300 MO AP →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.