Audax PR240T4
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.1 |
| Qes | 0.103 |
| Qms | 3.9 |
| Vas | 206 L |
| Sd | 360 cm² |
| Xmax | 3 mm |
| Re | 6.2 Ω |
| Bl | 16.8 T·m |
| Mms | 24.8 g |
| Pe | 100 W |
| Sensitivity | 100.4 dB |
Alignment hint
| EBP | 291 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Audax MHD24P66USM2CA14 | 27 -3 | 0.137 +0.04 | 157.6 -48.4 | 3.2 +0.2 | 96.5 -3.9 | usable | + | |
| ATC SB75-234 LC vp old stock | 26 -4 | 0.121 +0.02 | 120 -86 | 2.4 -0.6 | 92.6 -7.8 | risky | 75 W vs 100 W: lower power handling · Xmax 2.4 mm < 3 mm: lower excursion-limited SPL | + |
| Tannoy HPD 295 | 26 -4 | 0.233 +0.13 | 200 -6 | 3 = | 94.7 -5.7 | risky | 50 W vs 100 W: lower power handling | + |
| Tannoy MONITOR GOLD 10 III-LZ | 26 -4 | 0.23 +0.13 | 200 -6 | 2.9 -0.1 | 94.7 -5.7 | risky | 15 W vs 100 W: lower power handling · Xmax 2.9 mm < 3 mm: lower excursion-limited SPL | + |
| SEAS 25F-EWX 4 | 25 -5 | 0.217 +0.12 | 175 -31 | 4 +1 | 96.7 -3.7 | risky | 4 Ω vs 8 Ω: amp load changes · 60 W vs 100 W: lower power handling | + |
| Tannoy 250/HF/III-L-Z/8/U | 26 -4 | 0.233 +0.13 | 200 -6 | 4 +1 | 94.7 -5.7 | risky | 30 W vs 100 W: lower power handling | + |
| HiVi S10II | 20 -10 | 0.171 +0.07 | 219.3 +13.3 | 7 +4 | 94.7 -5.7 | risky | + | |
| Focal 10C01 v1 | 25.7 -4.3 | 0.199 +0.1 | 288 +82 | 5.5 +2.5 | 96.7 -3.7 | risky | 60 W vs 100 W: lower power handling | + |
| Focal 10C01 v3 | 25.7 -4.3 | 0.199 +0.1 | 288 +82 | 5.5 +2.5 | 96.6 -3.8 | risky | 60 W vs 100 W: lower power handling | + |
| Focal 10C01-T | 29 -1 | 0.237 +0.14 | 175.6 -30.4 | 5.5 +2.5 | 95.4 -5 | risky | 60 W vs 100 W: lower power handling | + |
Compare the closest 3 against the PR240T4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.