Audax PR240T0
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 90 Hz |
| Qts | 0.629 |
| Qes | 0.77 |
| Qms | 3.43 |
| Vas | 20.6 L |
| Sd | 344 cm² |
| Xmax | 1.8 mm |
| Re | 3.4 Ω |
| Bl | 7.9 T·m |
| Mms | 25.2 g |
| Pe | 80 W |
| Sensitivity | 98.6 dB |
Alignment hint
| EBP | 117 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 78.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion BL10-100 | 85.9 -4.1 | 0.587 -0.04 | 25.8 +5.2 | 2.5 +0.7 | 97.3 -1.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Monacor SP-10A/250NEO | 80 -10 | 0.635 +0.01 | 19 -1.6 | 3 +1.2 | 95.1 -3.5 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 10 CLX 64 | 70 -20 | 0.627 = | 21 +0.4 | 2.3 +0.5 | 93.8 -4.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Celestion TF 1018 | 79.8 -10.2 | 0.527 -0.1 | 23.8 +3.2 | 2 +0.2 | 96.3 -2.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Peavey S-10825 | 102 +12 | 0.671 +0.04 | 14.6 -6 | 2.7 +0.9 | 96.7 -1.9 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Celestion K10-70 | 80 -10 | 0.672 +0.04 | 31 +10.4 | 2.2 +0.4 | 95.9 -2.7 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PD102 ER | 81.8 -8.2 | 0.523 -0.11 | 26 +5.4 | 5 +3.2 | 98 -0.6 | usable | 16 Ω vs 4 Ω: amp load changes | + |
| JB Systems PWX10-200 | 85 -5 | 0.74 +0.11 | 16 -4.6 | 2.4 +0.6 | 93.3 -5.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| PHL Audio 3040 | 86 -4 | 0.393 -0.24 | 24 +3.4 | 2 +0.2 | 98.7 +0.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Celestion BN10-300S4 | 80.7 -9.3 | 0.437 -0.19 | 21.8 +1.2 | 3.5 +1.7 | 100 +1.4 | usable | + |
Compare the closest 3 against the PR240T0 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.