Audax HT300Z2
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 31.5 Hz |
| Qts | 0.337 |
| Qes | 0.35 |
| Qms | 9.1 |
| Vas | 162.5 L |
| Sd | 539 cm² |
| Xmax | 5.9 mm |
| Re | 3.23 Ω |
| Bl | 10.8 T·m |
| Mms | 64.1 g |
| Pe | 120 W |
| Sensitivity | 97.5 dB |
Alignment hint
| EBP | 90 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 47.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| AE Speakers TD12S | 31.5 = | 0.336 = | 159.4 -3.1 | 7 +1.1 | 94.9 -2.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Cabasse 30M22 | 31.5 = | 0.315 -0.02 | 196.1 +33.6 | 8 +2.1 | 97.7 +0.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Focal 13V 7511 | 31.2 -0.3 | 0.353 +0.02 | 154.2 -8.3 | 6.8 +0.9 | 93.6 -3.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Visaton TD | 31 -0.5 | 0.324 -0.01 | 200 +37.5 | 7.3 +1.4 | 95.5 -2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Davis 31TCA12 | 34 +2.5 | 0.296 -0.04 | 149 -13.5 | 6 +0.1 | 95.9 -1.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Visaton TD1 | 30.3 -1.2 | 0.327 -0.01 | 200 +37.5 | 7.6 +1.7 | 95.3 -2.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Rockford Fosgate S1-124 | 28 -3.5 | 0.326 -0.01 | 186 +23.5 | 9.9 +4 | 96.2 -1.3 | close | + | |
| AE Speakers TD12X | 33.9 +2.4 | 0.284 -0.05 | 159.4 -3.1 | 7 +1.1 | 95.4 -2.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Davis 31TCA12 vp rc | 32.5 +1 | 0.314 -0.02 | 222 +59.5 | 6 +0.1 | 96.2 -1.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Davis 31TCA12 v2012 | 38 +6.5 | 0.333 = | 216 +53.5 | 6 +0.1 | 97.9 +0.4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the HT300Z2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.