Audax HT240T0
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 80 Hz |
| Qts | 0.657 |
| Qes | 0.9 |
| Qms | 2.44 |
| Vas | 34.3 L |
| Sd | 351 cm² |
| Xmax | 1.5 mm |
| Re | 6.8 Ω |
| Bl | 8.7 T·m |
| Mms | 19.9 g |
| Pe | 80 W |
| Sensitivity | 95.6 dB |
Alignment hint
| EBP | 89 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 216.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion K10-70 | 80 = | 0.672 +0.02 | 31 -3.3 | 2.2 +0.7 | 95.9 +0.3 | close | + | |
| Selenium 10PW3 | 73 -7 | 0.654 = | 29 -5.3 | 1.3 -0.2 | 94.9 -0.7 | close | Xmax 1.3 mm < 1.5 mm: lower excursion-limited SPL | + |
| Celestion BL 10-100 | 70 -10 | 0.608 -0.05 | 33 -1.3 | 3.3 +1.8 | 95.7 +0.1 | close | + | |
| Peerless FSL-1015R02-08 | 68.4 -11.6 | 0.616 -0.04 | 37.7 +3.4 | 2.2 +0.7 | 95.9 +0.3 | close | + | |
| RCF L10CX1AK | 67.9 -12.1 | 0.59 -0.07 | 33 -1.3 | 3 +1.5 | 93.6 -2 | usable | 60 W vs 80 W: lower power handling | + |
| Celestion BL10-100 | 85.9 +5.9 | 0.587 -0.07 | 25.8 -8.5 | 2.5 +1 | 97.3 +1.7 | usable | + | |
| Eminence GAMMA 10 | 63 -17 | 0.51 -0.15 | 36.4 +2.1 | 1.6 +0.1 | 95.9 +0.3 | usable | + | |
| Fenton NS10X | 67.5 -12.5 | 0.563 -0.09 | 40.2 +5.9 | 3.8 +2.3 | 95.6 = | usable | + | |
| Celestion TF 1018 | 79.8 -0.2 | 0.527 -0.13 | 23.8 -10.5 | 2 +0.5 | 96.3 +0.7 | usable | + | |
| Monacor SP-10A/250NEO | 80 = | 0.635 -0.02 | 19 -15.3 | 3 +1.5 | 95.1 -0.5 | usable | + |
Compare the closest 3 against the HT240T0 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.