Audax HT240M0 vp1
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 27.5 Hz |
| Qts | 0.404 |
| Qes | 0.484 |
| Qms | 2.451 |
| Vas | 172 L |
| Sd | 340 cm² |
| Xmax | 4.5 mm |
| Re | 6.3 Ω |
| Bl | 8.4 T·m |
| Mms | 31.6 g |
| Pe | 80 W |
| Sensitivity | 91.7 dB |
Alignment hint
| EBP | 57 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 83.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Audax HIF24HSMC-2CA12 v2 | 29 +1.5 | 0.41 +0.01 | 171.6 -0.4 | 5 +0.5 | 92.5 +0.8 | close | 40 W vs 80 W: lower power handling | + |
| Peerless 832531 | 27.4 -0.1 | 0.41 +0.01 | 160.6 -11.4 | 4 -0.5 | 91.4 -0.3 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| Siare 26SPCS | 26 -1.5 | 0.382 -0.02 | 170 -2 | 4 -0.5 | 91.8 +0.1 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| SEAS A26RE4 - H1411-08 v2012 | 25 -2.5 | 0.387 -0.02 | 169 -3 | 4 -0.5 | 90.9 -0.8 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| SEAS P25REX | 27 -0.5 | 0.437 +0.03 | 156.8 -15.2 | 6 +1.5 | 90.7 -1 | close | + | |
| SEAS P25REX/DD | 27 -0.5 | 0.437 +0.03 | 156.8 -15.2 | 6 +1.5 | 90.7 -1 | close | + | |
| Dayton Audio RS270S-8 | 26.9 -0.6 | 0.41 +0.01 | 147.2 -24.8 | 6 +1.5 | 90 -1.7 | close | + | |
| SEAS A26RE4 - H1411 | 25 -2.5 | 0.415 +0.01 | 161 -11 | 4 -0.5 | 90.6 -1.1 | close | Xmax 4 mm < 4.5 mm: lower excursion-limited SPL | + |
| KEF B139 SP1044 | 25 -2.5 | 0.373 -0.03 | 164 -8 | 6 +1.5 | 90.9 -0.8 | close | 50 W vs 80 W: lower power handling | + |
| Beyma 10BR60 V2 v2023 | 29 +1.5 | 0.388 -0.02 | 142 -30 | 6.5 +2 | 91.8 +0.1 | close | + |
Compare the closest 3 against the HT240M0 vp1 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.