Audax 21PA12 RV
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 57.2 Hz |
| Qts | 1.462 |
| Qes | 2.079 |
| Qms | 4.926 |
| Vas | 57.6 L |
| Sd | 283 cm² |
| Xmax | 1 mm |
| Re | 3.65 Ω |
| Bl | 3.1 T·m |
| Mms | 15.1 g |
| Pe | 10 W |
| Sensitivity | 92.5 dB |
Alignment hint
| EBP | 28 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Jinwey YDA-250-4 | 58.3 +1.1 | 1.291 -0.17 | 36.6 -21 | 2 +1 | 92.2 -0.3 | usable | + | |
| Visaton W250 vp | 55.6 -1.6 | 1.045 -0.42 | 58.1 +0.5 | 3.4 +2.4 | 91.9 -0.6 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| SICA 10 D 1 CS | 76.1 +18.9 | 1.564 +0.1 | 43.9 -13.7 | 1.5 +0.5 | 93.2 +0.7 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Jinwey YDA-250-8 | 60.1 +2.9 | 1.473 +0.01 | 35.8 -21.8 | 1.9 +0.9 | 89 -3.5 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma HP10 | 61 +3.8 | 1.057 -0.4 | 51 -6.6 | 3.1 +2.1 | 92.1 -0.4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Ciare CH250 | 65 +7.8 | 1.367 -0.09 | 52 -5.6 | 0.5 -0.5 | 95.4 +2.9 | usable | Xmax 0.5 mm < 1 mm: lower excursion-limited SPL | + |
| Skytronic SP 1000 | 52 -5.2 | 1.064 -0.4 | 51.6 -6 | 6 +5 | 90.6 -1.9 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| SICA LP 266.25 / 280 ER 4 | 75 +17.8 | 1.311 -0.15 | 40.6 -17 | 1.5 +0.5 | 96.9 +4.4 | usable | + | |
| Fenton PS10 vp2 | 59.9 +2.7 | 1.01 -0.45 | 41.2 -16.4 | 3.2 +2.2 | 90.4 -2.1 | usable | 16 Ω vs 4 Ω: amp load changes | + |
| Davis 28MP10 | 40 -17.2 | 1.42 -0.04 | 80.1 +22.5 | 3 +2 | 87.8 -4.7 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 21PA12 RV →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.