Ardan PRO W-31
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 36.4 Hz |
| Qts | 0.382 |
| Qes | 0.439 |
| Qms | 2.922 |
| Vas | 170.6 L |
| Sd | 551 cm² |
| Xmax | 4 mm |
| Re | 7 Ω |
| Bl | 13.2 T·m |
| Mms | 47.7 g |
| Pe | 200 W |
| Sensitivity | 95.3 dB |
Alignment hint
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 70.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Supravox 285 GMF vp5 | 35 -1.4 | 0.372 -0.01 | 150 -20.6 | 4 = | 95.4 +0.1 | close | 70 W vs 200 W: lower power handling | + |
| Supravox 285 GMF vp6 | 35 -1.4 | 0.372 -0.01 | 150 -20.6 | 4 = | 95.4 +0.1 | close | 70 W vs 200 W: lower power handling | + |
| Beyma HP12 | 36 -0.4 | 0.401 +0.02 | 200 +29.4 | 4 = | 95.6 +0.3 | close | 150 W vs 200 W: lower power handling | + |
| Eminence DELTALITE II 2512 v2 | 37 +0.6 | 0.386 = | 147 -23.6 | 4.9 +0.9 | 96.3 +1 | close | + | |
| Sonido SCW-300 | 35 -1.4 | 0.401 +0.02 | 210 +39.4 | 4.5 +0.5 | 95 -0.3 | close | 50 W vs 200 W: lower power handling | + |
| Ardan W PRO-31 | 36.8 +0.4 | 0.373 -0.01 | 133.9 -36.7 | 6 +2 | 94.6 -0.7 | close | + | |
| Klipsch K28E | 35.1 -1.3 | 0.441 +0.06 | 152.7 -17.9 | 4 = | 96.5 +1.2 | close | 4 Ω vs 8 Ω: amp load changes · 100 W vs 200 W: lower power handling | + |
| Davis KIT ALBEDO | 37.5 +1.1 | 0.459 +0.08 | 166 -4.6 | 5 +1 | 96.5 +1.2 | close | 150 W vs 200 W: lower power handling | + |
| Beyma 12BR70 | 35 -1.4 | 0.355 -0.03 | 135 -35.6 | 4.8 +0.8 | 94.7 -0.6 | close | 125 W vs 200 W: lower power handling | + |
| Tannoy DC 3134 CPA12 | 37.7 +1.3 | 0.369 -0.01 | 226.7 +56.1 | 5 +1 | 96.1 +0.8 | close | 16 Ω vs 8 Ω: amp load changes · 75 W vs 200 W: lower power handling | + |
Compare the closest 3 against the PRO W-31 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.