Altec 515-8LFE
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 25.7 Hz |
| Qts | 0.203 |
| Qes | 0.22 |
| Qms | 2.55 |
| Vas | 547.7 L |
| Sd | 823.5 cm² |
| Xmax | 4.3 mm |
| Re | 5.5 Ω |
| Bl | 16.4 T·m |
| Mms | 66.6 g |
| Pe | 125 W |
| Sensitivity | 99.9 dB |
Alignment hint
| EBP | 117 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 49.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fluxmag 1505 | 25.2 -0.5 | 0.214 +0.01 | 571 +23.3 | 5 +0.7 | 99.6 -0.3 | close | + | |
| Supravox 400 EXC Ag 14V | 25.4 -0.3 | 0.23 +0.03 | 554.5 +6.8 | 5 +0.7 | 99.1 -0.8 | close | + | |
| Fostex L 470 | 25 -0.7 | 0.203 = | 457 -90.7 | 4.2 -0.1 | 98 -1.9 | close | Xmax 4.2 mm < 4.3 mm: lower excursion-limited SPL | + |
| Supravox 400-2000EXC_15V | 25 -0.7 | 0.196 -0.01 | 429 -118.7 | 4.9 +0.6 | 98.1 -1.8 | close | + | |
| Supravox 400 EXC Ag 13V | 25.3 -0.4 | 0.253 +0.05 | 555.6 +7.9 | 5 +0.7 | 98.7 -1.2 | close | + | |
| Beyma 15B42 | 24.2 -1.5 | 0.185 -0.02 | 480.9 -66.8 | 4 -0.3 | 98.8 -1.1 | close | Xmax 4 mm < 4.3 mm: lower excursion-limited SPL | + |
| Altec 416-8B v1 | 23.6 -2.1 | 0.22 +0.02 | 577 +29.3 | 3.8 -0.5 | 98 -1.9 | close | Xmax 3.8 mm < 4.3 mm: lower excursion-limited SPL | + |
| Supravox 400-2000EXC_14V | 25 -0.7 | 0.214 +0.01 | 439 -108.7 | 5 +0.7 | 97.8 -2.1 | close | + | |
| Alpine 6015 | 22 -3.7 | 0.197 -0.01 | 453 -94.7 | 4.1 -0.2 | 100.3 +0.4 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 4.1 mm < 4.3 mm: lower excursion-limited SPL | + |
| Altec 604-2 | 27.1 +1.4 | 0.213 +0.01 | 446 -101.7 | 3.8 -0.5 | 98.6 -1.3 | close | Xmax 3.8 mm < 4.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 515-8LFE →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.