Altec 417-16LF
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 47.7 Hz |
| Qts | 0.376 |
| Qes | 0.42 |
| Qms | 3.59 |
| Vas | 107 L |
| Sd | 503.2 cm² |
| Xmax | 1.3 mm |
| Re | 11.5 Ω |
| Bl | 17.4 T·m |
| Mms | 36.9 g |
| Pe | 100 W |
| Sensitivity | 94.8 dB |
Alignment hint
| EBP | 114 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 42.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Altec 920-8B | 48 +0.3 | 0.362 -0.01 | 85 -22 | 1.3 = | 97.4 +2.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion PULSE12 | 45 -2.7 | 0.42 +0.04 | 104.77 -2.23 | 3.8 +2.5 | 94.7 -0.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Monacor SP-30/200PA | 44 -3.7 | 0.386 +0.01 | 120 +13 | 2.5 +1.2 | 96.8 +2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| SICA 12E2CS | 47.5 -0.2 | 0.36 -0.02 | 76.9 -30.1 | 2 +0.7 | 94.6 -0.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Monacor SP-30/200NEO | 43 -4.7 | 0.409 +0.03 | 98 -9 | 2 +0.7 | 96.1 +1.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Jensen J12/200-8 | 50 +2.3 | 0.368 -0.01 | 89 -18 | 2 +0.7 | 97.5 +2.7 | close | 8 Ω vs 16 Ω: amp load changes | + |
| MCM Electronics 55-2962 | 48 +0.3 | 0.391 +0.02 | 94.5 -12.5 | 4.8 +3.5 | 96.3 +1.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion PULSE 12 | 45 -2.7 | 0.416 +0.04 | 104.6 -2.4 | 4 +2.7 | 96.2 +1.4 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion BL12-200X | 45 -2.7 | 0.416 +0.04 | 104.6 -2.4 | 4 +2.7 | 96.3 +1.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Fane SOVEREIGN 12-300 | 50 +2.3 | 0.389 +0.01 | 103.6 -3.4 | 4.5 +3.2 | 98.4 +3.6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the 417-16LF →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.