Altec 3124
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 26 Hz |
| Qts | 0.288 |
| Qes | 0.32 |
| Qms | 2.92 |
| Vas | 186.9 L |
| Sd | 505.8 cm² |
| Xmax | 6.4 mm |
| Re | 6.6 Ω |
| Bl | 15.6 T·m |
| Mms | 71.9 g |
| Pe | 250 W |
| Sensitivity | 92.9 dB |
Alignment hint
| EBP | 81 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 37.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Great Plains Audio 3124 GPA | 26 = | 0.288 = | 186.9 = | 6.4 = | 93.1 +0.2 | close | + | |
| Eton 12-680/A8/62 HEX SYMPHONIE II | 26 = | 0.296 +0.01 | 173 -13.9 | 6 -0.4 | 92.8 -0.1 | close | Xmax 6 mm < 6.4 mm: lower excursion-limited SPL | + |
| Axon 12K01 | 25 -1 | 0.289 = | 191.8 +4.9 | 6.7 +0.3 | 95.4 +2.5 | close | 4 Ω vs 8 Ω: amp load changes · 125 W vs 250 W: lower power handling | + |
| Visaton TIW300 | 25 -1 | 0.282 -0.01 | 160 -26.9 | 9.7 +3.3 | 92.9 = | close | + | |
| TVM ARN 312-00/4 | 22 -4 | 0.289 = | 206 +19.1 | 6.4 = | 93.8 +0.9 | close | 4 Ω vs 8 Ω: amp load changes · 100 W vs 250 W: lower power handling | + |
| Scan-Speak 32W/4878T01 | 23 -3 | 0.286 = | 170 -16.9 | 7 +0.6 | 94.5 +1.6 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 250 W: lower power handling | + |
| STX W.32.500.8.MC | 25 -1 | 0.299 +0.01 | 155 -31.9 | 7.5 +1.1 | 92.1 -0.8 | close | + | |
| Visaton WS33NG | 30 +4 | 0.308 +0.02 | 190 +3.1 | 8 +1.6 | 94.5 +1.6 | close | + | |
| Dayton Audio ST305-8 Séries II | 26.2 +0.2 | 0.334 +0.05 | 164 -22.9 | 8 +1.6 | 92.3 -0.6 | close | + | |
| Monacor SPH-300KE vp1 | 26.5 +0.5 | 0.357 +0.07 | 175 -11.9 | 6.5 +0.1 | 92.3 -0.6 | close | 120 W vs 250 W: lower power handling | + |
Compare the closest 3 against the 3124 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.