Alpine SWA-12S4
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 30 Hz |
| Qts | 0.49 |
| Qes | 0.53 |
| Qms | 7.07 |
| Vas | 67.79 L |
| Sd | 452 cm² |
| Xmax | 10 mm |
| Re | 3.6 Ω |
| Bl | 12.41 T·m |
| Mms | 120.3 g |
| Pe | 250 W |
| Sensitivity | 87.2 dB |
Alignment hint
| EBP | 57 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 62.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Infinity PRIMUS 1270 | 29.7 -0.3 | 0.49 = | 75.7 +7.91 | 11.3 +1.3 | 87.3 +0.1 | close | + | |
| Powerbass S-1204D | 31 +1 | 0.5 +0.01 | 65 -2.79 | 9.5 -0.5 | 87.2 = | close | Xmax 9.5 mm < 10 mm: lower excursion-limited SPL | + |
| Sound Storm Labs CR12D | 30.7 +0.7 | 0.522 +0.03 | 66.9 -0.89 | 10.3 +0.3 | 87.5 +0.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Audio System HX12 SQ | 28.2 -1.8 | 0.5 +0.01 | 68 +0.21 | 11.8 +1.8 | 86.1 -1.1 | close | + | |
| Audiomobile ELITE 2212 | 28 -2 | 0.48 -0.01 | 59.46 -8.33 | 12.7 +2.7 | 85.8 -1.4 | close | + | |
| Infinity KAPPA 1200W | 26.5 -3.5 | 0.496 +0.01 | 64.47 -3.32 | 12.75 +2.75 | 85.1 -2.1 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Monacor BLACKBASS-12 8 Ohms | 29 -1 | 0.482 -0.01 | 61 -6.79 | 7.5 -2.5 | 87.1 -0.1 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 7.5 mm < 10 mm: lower excursion-limited SPL | + |
| JL Audio 12W1V3-2 | 26.55 -3.45 | 0.52 +0.03 | 72 +4.21 | 11 +1 | 85.9 -1.3 | close | 2 Ω vs 4 Ω: amp load changes | + |
| JL Audio 12W1V3-4 | 26.21 -3.79 | 0.5 +0.01 | 76.63 +8.84 | 11 +1 | 86.1 -1.1 | close | + | |
| Focal P30F | 28 -2 | 0.467 -0.02 | 70 +2.21 | 9.1 -0.9 | 90.1 +2.9 | close | Xmax 9.1 mm < 10 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SWA-12S4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.