Alpine 6013

10" · 4 Ω · 100 W · 94.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	30 Hz
Qts	0.313
Qes	0.34
Qms	4
Vas	96 L
Sd	346 cm²
Xmax	3.8 mm
Re	3.2 Ω
Bl	9.3 T·m
Mms	49.2 g
Pe	100 W
Sensitivity	94.8 dB

Alignment hint

EBP	88 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 23.4 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
SEAS 25F-EWX 4 vp	27 -3	0.289 -0.02	100 +4	4 +0.2	93.2 -1.6	close	60 W vs 100 W: lower power handling	+
SICA 10 H 2 CS 4 Ohms	30.6 +0.6	0.303 -0.01	75.8 -20.2	5.3 +1.5	94.4 -0.4	close		+
Monacor SPH-275C	31 +1	0.287 -0.03	100 +4	6 +2.2	93.1 -1.7	close	8 Ω vs 4 Ω: amp load changes	+
SB Acoustics SW26SFC38-4	28 -2	0.31 =	84 -12	5.5 +1.7	93 -1.8	close		+
Volt B250.8 v2014	32 +2	0.302 -0.01	89 -7	5.5 +1.7	92.4 -2.4	close	8 Ω vs 4 Ω: amp load changes	+
ATS Acoustics HG25 vp Double ferrite	29.8 -0.2	0.26 -0.05	94.2 -1.8	4 +0.2	92.6 -2.2	close	8 Ω vs 4 Ω: amp load changes	+
Alcone AC 10 HE	28 -2	0.322 +0.01	100 +4	3.5 -0.3	90.9 -3.9	close	8 Ω vs 4 Ω: amp load changes · Xmax 3.5 mm < 3.8 mm: lower excursion-limited SPL	+
HiVi S10IIP	27 -3	0.287 -0.03	98.1 +2.1	7 +3.2	92.9 -1.9	close	8 Ω vs 4 Ω: amp load changes	+
Ciare HW251	29 -1	0.33 +0.02	111 +15	4 +0.2	90.6 -4.2	close	8 Ω vs 4 Ω: amp load changes	+
Monacor SP-250P	33 +3	0.327 +0.01	115 +19	3.5 -0.3	93.2 -1.6	close	8 Ω vs 4 Ω: amp load changes · Xmax 3.5 mm < 3.8 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 6013 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.