AE Speakers TD10M

10" · 8 Ω · 500 W · 94.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	40.6 Hz
Qts	0.235
Qes	0.256
Qms	2.803
Vas	59.1 L
Sd	345 cm²
Xmax	6 mm
Re	6.6 Ω
Bl	16.9 T·m
Mms	43.5 g
Pe	500 W
Sensitivity	94.7 dB

Alignment hint

EBP	159 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 7.3 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
AE Speakers TD10M-8	40.1 -0.5	0.238 =	59.2 +0.1	6 =	94.5 -0.2	close		+
Beyma 10LW30/N	38 -2.6	0.234 =	56 -3.1	7 +1	94.2 -0.5	close		+
Eminence KAPPALITE 3010LF-4	40 -0.6	0.251 +0.02	53.5 -5.6	8.1 +2.1	96.4 +1.7	close	4 Ω vs 8 Ω: amp load changes	+
Beyma 10WRS300	41 +0.4	0.276 +0.04	66.5 +7.4	5.8 -0.2	95.1 +0.4	close	300 W vs 500 W: lower power handling · Xmax 5.8 mm < 6 mm: lower excursion-limited SPL	+
Eminence KAPPALITE 3010 LF	38.7 -1.9	0.273 +0.04	62.4 +3.3	8.5 +2.5	93.5 -1.2	close		+
Beyma 10LW30	42 +1.4	0.293 +0.06	55 -4.1	7 +1	94.6 -0.1	close		+
Beyma 10G200	45 +4.4	0.251 +0.02	56.1 -3	4.5 -1.5	96.2 +1.5	usable	200 W vs 500 W: lower power handling · Xmax 4.5 mm < 6 mm: lower excursion-limited SPL	+
Eminence KAPPA PRO 10 LF	39 -1.6	0.281 +0.05	73 +13.9	7.2 +1.2	95.4 +0.7	usable		+
Beyma 10MW/ND	47 +6.4	0.26 +0.03	48 -11.1	5.9 -0.1	96.3 +1.6	usable	350 W vs 500 W: lower power handling · Xmax 5.9 mm < 6 mm: lower excursion-limited SPL	+
SICA 10 S 3 PL v2017	43 +2.4	0.265 +0.03	39.9 -19.2	6.1 +0.1	94.5 -0.2	usable		+

Compare the closest 3 against the TD10M →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.