Accuton S280-6-282

10" · 8 Ω · 150 W · 90.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	20 Hz
Qts	0.263
Qes	0.28
Qms	4.43
Vas	226 L
Sd	408 cm²
Xmax	6 mm
Re	6.6 Ω
Bl	13.9 T·m
Mms	65.4 g
Pe	150 W
Sensitivity	90.9 dB

Alignment hint

EBP	71 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 36.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Aurum Cantus AC250F1	20 =	0.287 +0.02	224 -2	8 +2	90 -0.9	close		+
Monacor SPH-250CTC vp CARBON	20 =	0.247 -0.02	220 -6	7.5 +1.5	94 +3.1	close	4 Ω vs 8 Ω: amp load changes · 100 W vs 150 W: lower power handling	+
Scan-Speak 26W/4867T00	18 -2	0.294 +0.03	223 -3	9 +3	91.6 +0.7	close	4 Ω vs 8 Ω: amp load changes	+
Focal 10N 501	21.8 +1.8	0.231 -0.03	212.7 -13.3	6 =	92.5 +1.6	close	60 W vs 150 W: lower power handling	+
Focal 10N510	21.8 +1.8	0.231 -0.03	212.7 -13.3	6 =	92.5 +1.6	close	85 W vs 150 W: lower power handling	+
Aurum Cantus AC250/75C2C	23 +3	0.275 +0.01	193 -33	8 +2	91.2 +0.3	close		+
Scan-Speak 26W/8861T00	19 -1	0.31 +0.05	234 +8	9 +3	90 -0.9	close	80 W vs 150 W: lower power handling	+
Focal 10L 6411	22.4 +2.4	0.253 -0.01	210.4 -15.6	8 +2	93.5 +2.6	close		+
Philips AD10240/W8	23 +3	0.261 =	248.2 +22.2	7.8 +1.8	93.6 +2.7	close	60 W vs 150 W: lower power handling	+
Monacor SPH-265	23 +3	0.275 +0.01	199 -27	5.5 -0.5	91.9 +1	close	Xmax 5.5 mm < 6 mm: lower excursion-limited SPL	+

Compare the closest 3 against the S280-6-282 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.