← all drivers

18 Sound ND100KT

0.75" exit · 8 Ω · 50 W · 111 dB · datasheet ↗

Compression driver specs

Throat exit0.75"
Voice coil51 mm
Impedance8 Ω
Usable range500-5000 Hz
Min crossover500 Hz
Sensitivity (on horn)111 dB
Magnetneodymium
Weight1.5 kg
Power (AES)50 W

Compatible horns (same exit)

Matched on throat exit (0.75") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
LaVoce DN07.10LTF800 +300700 +20020000 +1500025.4 -25.6105 -6risky16 Ω vs 8 Ω: amp load changes · 15 W vs 50 W: lower power handling · min crossover 800 Hz > 500 Hz: raise the XO+
LaVoce DN07.10LTF800 +300700 +20020000 +1500025.4 -25.6105 -6risky15 W vs 50 W: lower power handling · min crossover 800 Hz > 500 Hz: raise the XO+
Celestion CDX07-10752500 +20001500 +100018000 +1300025 -26109 -2risky15 W vs 50 W: lower power handling · min crossover 2500 Hz > 500 Hz: raise the XO+
LaVoce DN07.10LM2500 +20002000 +150018000 +1300025.4 -25.6109 -2risky16 Ω vs 8 Ω: amp load changes · 10 W vs 50 W: lower power handling · min crossover 2500 Hz > 500 Hz: raise the XO+
LaVoce DN07.10LM2500 +20002000 +150018000 +1300025.4 -25.6109 -2risky4 Ω vs 8 Ω: amp load changes · 10 W vs 50 W: lower power handling · min crossover 2500 Hz > 500 Hz: raise the XO+
LaVoce DN07.10LM2500 +20002000 +150018000 +1300025.4 -25.6109 -2risky10 W vs 50 W: lower power handling · min crossover 2500 Hz > 500 Hz: raise the XO+
B&C DE72500 +20002000 +150018000 +1300025 -26109 -2risky16 Ω vs 8 Ω: amp load changes · 10 W vs 50 W: lower power handling · min crossover 2500 Hz > 500 Hz: raise the XO+
B&C DE72500 +20002000 +150018000 +1300025 -26109 -2risky10 W vs 50 W: lower power handling · min crossover 2500 Hz > 500 Hz: raise the XO+
B&C DE72500 +20002000 +150018000 +1300025 -26107 -4risky4 Ω vs 8 Ω: amp load changes · 10 W vs 50 W: lower power handling · min crossover 2500 Hz > 500 Hz: raise the XO+

Compare the closest 3 against the ND100KT →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.