18 Sound HD3020T
Compression driver specs
| Throat exit | 2" |
|---|---|
| Voice coil | 75 mm |
| Impedance | 8 Ω |
| Usable range | 800-20000 Hz |
| Min crossover | 1000 Hz |
| Sensitivity (on horn) | 110 dB |
| Magnet | ferrite |
| Weight | 4.9 kg |
| Power (AES) | 110 W |
Compatible horns (same exit)
- B&C ME60 · 60°×40°
- Beyma TD-460/N · 60°×40°
- BMS 2230 · 90°×55°
- BMS 2236 · 60°×40°
Matched on throat exit (2") only. Verify mounting and crossover against both datasheets.
Substitute candidates
| Driver | Min XO (Hz) | Range low (Hz) | Range high (Hz) | Voice coil (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton D571CN | 800 -200 | 800 = | 20000 = | 72 -3 | 110 = | close | + | |
| Eminence N320T-8 | 800 -200 | 800 = | 20000 = | 76.2 +1.2 | 110.4 +0.4 | close | + | |
| Oberton D5073 | 800 -200 | 800 = | 20000 = | 72 -3 | 110.5 +0.5 | close | 80 W vs 110 W: lower power handling | + |
| Oberton D572CN | 800 -200 | 800 = | 20000 = | 72 -3 | 111 +1 | close | + | |
| Oberton D572CT | 800 -200 | 800 = | 20000 = | 72 -3 | 111 +1 | close | + | |
| Oberton ND571CN | 1000 = | 1000 +200 | 20000 = | 72 -3 | 110 = | close | + | |
| Oberton ND571CT | 1000 = | 1000 +200 | 20000 = | 72 -3 | 110 = | close | + | |
| Oberton ND5071 | 1000 = | 1000 +200 | 20000 = | 72 -3 | 109 -1 | close | 75 W vs 110 W: lower power handling | + |
| Beyma CP/750/TI | 800 -200 | 600 -200 | 20000 = | 72.4 -2.6 | 110 = | close | 70 W vs 110 W: lower power handling | + |
| 18 Sound ND32ST | 1200 +200 | 800 = | 20000 = | 75 = | 112 +2 | close | 16 Ω vs 8 Ω: amp load changes · min crossover 1200 Hz > 1000 Hz: raise the XO | + |
Compare the closest 3 against the HD3020T →
Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.