← all drivers

18 Sound 8NTLS2000

8" · 16 Ω · 350 W · 93 dB · datasheet ↗

Thiele-Small parameters

Nominal size8"
Impedance16 Ω
Fs42 Hz
Qts0.24
Qes0.24
Qms11.2
Vas28 L
Sd227 cm²
Xmax7.4 mm
Re11.2 Ω
Bl21.8 T·m
Mms38 g
Pe350 W
Sensitivity93 dB

Alignment hint

EBP175 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 3.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
18 Sound 8NTLS200043 +10.24 =30 +27.4 =93.5 +0.5close4 Ω vs 16 Ω: amp load changes+
18 Sound 8NTLS200041 -10.19 -0.0527 -17.4 =93.5 +0.5close8 Ω vs 16 Ω: amp load changes+
Faital PRO 8RS35042 =0.3 +0.0623.7 -4.37.37 -0.0390 -3usable8 Ω vs 16 Ω: amp load changes · Xmax 7.37 mm < 7.4 mm: lower excursion-limited SPL+
Faital PRO 8RS34042 =0.34 +0.125.5 -2.57.33 -0.0791 -2usable8 Ω vs 16 Ω: amp load changes · Xmax 7.33 mm < 7.4 mm: lower excursion-limited SPL+
Beyma 8NMFW37 -50.34 +0.127 -19 +1.690 -3usable8 Ω vs 16 Ω: amp load changes · 200 W vs 350 W: lower power handling+
Beyma 8"P300Fe/N53 +110.31 +0.0724.8 -3.26 -1.494 +1usable8 Ω vs 16 Ω: amp load changes · Xmax 6 mm < 7.4 mm: lower excursion-limited SPL+
B&C 8FG5149 +70.32 +0.0820 -86.5 -0.993 =usable8 Ω vs 16 Ω: amp load changes · 250 W vs 350 W: lower power handling · Xmax 6.5 mm < 7.4 mm: lower excursion-limited SPL+
18 Sound 8NMB42061 +190.28 +0.0433 +55.8 -1.695 +2usable8 Ω vs 16 Ω: amp load changes · Xmax 5.8 mm < 7.4 mm: lower excursion-limited SPL+
18 Sound 8NMB42059 +170.31 +0.0731 +35.8 -1.695 +2usable4 Ω vs 16 Ω: amp load changes · Xmax 5.8 mm < 7.4 mm: lower excursion-limited SPL+
Faital PRO 8RS25056 +140.32 +0.0818.3 -9.76.92 -0.4893 =usable8 Ω vs 16 Ω: amp load changes · 200 W vs 350 W: lower power handling · Xmax 6.92 mm < 7.4 mm: lower excursion-limited SPL+

Compare the closest 3 against the 8NTLS2000 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.