18 Sound 6ND410
Thiele-Small parameters
| Nominal size | 6.5" |
|---|---|
| Impedance | 16 Ω |
| Fs | 149 Hz |
| Qts | 0.48 |
| Qes | 0.55 |
| Qms | 4.14 |
| Vas | 6.2 L |
| Sd | 143 cm² |
| Xmax | 2 mm |
| Re | 10.6 Ω |
| Bl | 13 T·m |
| Mms | 8.8 g |
| Pe | 180 W |
| Sensitivity | 102 dB |
Alignment hint
| EBP | 271 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 6NMB420 | 112 -37 | 0.4 -0.08 | 5.9 -0.3 | 3 +1 | 100 -2 | usable | + | |
| B&C 6PEV13 | 126 -23 | 0.36 -0.12 | 6 -0.2 | 2.5 +0.5 | 99 -3 | usable | 8 Ω vs 16 Ω: amp load changes · 120 W vs 180 W: lower power handling | + |
| Oberton 6M150 | 115.1 -33.9 | 0.422 -0.06 | 5.35 -0.85 | 2.25 +0.25 | 96 -6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 6NMB420 | 110 -39 | 0.33 -0.15 | 6.1 -0.1 | 3 +1 | 100 -2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 6MDN44 | 138 -11 | 0.47 -0.01 | 2.8 -3.4 | 3 +1 | 97 -5 | usable | + | |
| 18 Sound 6ND410 | 120 -29 | 0.24 -0.24 | 6.2 = | 2 = | 102 = | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Oberton 6NM150 | 124 -25 | 0.377 -0.1 | 4 -2.2 | 2.25 +0.25 | 97 -5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 6MD38 | 130 -19 | 0.44 -0.04 | 3 -3.2 | 2 = | 96 -6 | usable | 8 Ω vs 16 Ω: amp load changes · 120 W vs 180 W: lower power handling | + |
| 18 Sound 6NMB900 | 100 -49 | 0.34 -0.14 | 6.65 +0.45 | 3 +1 | 96 -6 | risky | + | |
| Beyma 6"MI100 | 128 -21 | 0.51 +0.03 | 3.1 -3.1 | 3 +1 | 94 -8 | risky | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the 6ND410 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.