18 Sound 21LW2600
Thiele-Small parameters
| Nominal size | 21" |
|---|---|
| Impedance | 4 Ω |
| Fs | 27 Hz |
| Qts | 0.37 |
| Qes | 0.39 |
| Qms | 6.9 |
| Vas | 190 L |
| Sd | 1660 cm² |
| Xmax | 14.6 mm |
| Re | 2.5 Ω |
| Bl | 24.5 T·m |
| Mms | 420 g |
| Pe | 1600 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 69 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 71.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 21SW152 | 32 +5 | 0.36 -0.01 | 200 +10 | 15 +0.4 | 96 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| RCF LF21N551 | 35 +8 | 0.33 -0.04 | 200 +10 | 15 +0.4 | 97 = | usable | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 21NLW4100 | 34 +7 | 0.4 +0.03 | 219 +29 | 15.2 +0.6 | 97 = | usable | + | |
| Eminence NSW6021-6 | 29 +2 | 0.31 -0.06 | 224.58 +34.58 | 21 +6.4 | 97 = | usable | 6 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 21NTLW5000 | 31 +4 | 0.36 -0.01 | 270 +80 | 17.5 +2.9 | 97 = | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Fane Colossus Prime 21NDXL | 33 +6 | 0.36 -0.01 | 241 +51 | 14 -0.6 | 98 +1 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 14 mm < 14.6 mm: lower excursion-limited SPL | + |
| Lavoce SAN215.30 | 35 +8 | 0.33 -0.04 | 200 +10 | 14.9 +0.3 | 95.7 -1.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 21SW152 | 32 +5 | 0.3 -0.07 | 200 +10 | 15 +0.4 | 96 -1 | usable | + | |
| B&C 21SW115 | 30 +3 | 0.37 = | 318 +128 | 14 -0.6 | 97 = | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 14 mm < 14.6 mm: lower excursion-limited SPL | + |
| B&C 21SW115 | 33 +6 | 0.36 -0.01 | 278 +88 | 14 -0.6 | 97 = | usable | Xmax 14 mm < 14.6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 21LW2600 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.