18 Sound 18NLW9601C
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38 Hz |
| Qts | 0.34 |
| Qes | 0.36 |
| Qms | 6.29 |
| Vas | 99 L |
| Sd | 1130 cm² |
| Xmax | 14 mm |
| Re | 4.7 Ω |
| Bl | 31.7 T·m |
| Mms | 275 g |
| Pe | 1800 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 106 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 29.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 18NLW9601 | 38 = | 0.28 -0.06 | 111 +12 | 14 = | 96 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 18NLW4500 | 37 -1 | 0.31 -0.03 | 127 +28 | 14.75 +0.75 | 96.5 +1.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 18NLW9601 | 39 +1 | 0.28 -0.06 | 120 +21 | 14 = | 96 +1 | usable | + | |
| 18 Sound 18NLW4500 | 35 -3 | 0.33 -0.01 | 151 +52 | 15.3 +1.3 | 97 +2 | usable | + | |
| 18 Sound 18NTLS5000 | 37 -1 | 0.33 -0.01 | 75 -24 | 17.75 +3.75 | 89 -6 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Ciare PW 465 ND | 37 -1 | 0.39 +0.05 | 141.16 +42.16 | 11.5 -2.5 | 94.4 -0.6 | usable | 1000 W vs 1800 W: lower power handling · Xmax 11.5 mm < 14 mm: lower excursion-limited SPL | + |
| B&C 18SW100 | 36 -2 | 0.36 +0.02 | 160 +61 | 12.5 -1.5 | 96 +1 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 12.5 mm < 14 mm: lower excursion-limited SPL | + |
| B&C 18SW115 | 34 -4 | 0.3 -0.04 | 149.1 +50.1 | 14 = | 96 +1 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Eminence NSW4018-8 | 36 -2 | 0.38 +0.04 | 164.49 +65.49 | 15.21 +1.21 | 96.6 +1.6 | usable | + | |
| 18 Sound 18LW2500 | 34 -4 | 0.335 -0.01 | 135 +36 | 9.1 -4.9 | 96 +1 | usable | Xmax 9.1 mm < 14 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18NLW9601C →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.