18 Sound 18NLW9600
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 34 Hz |
| Qts | 0.281 |
| Qes | 0.29 |
| Qms | 8.7 |
| Vas | 149 L |
| Sd | 1143 cm² |
| Xmax | 9 mm |
| Re | 4.7 Ω |
| Bl | 30.5 T·m |
| Mms | 269.3 g |
| Pe | 1800 W |
| Sensitivity | 97.3 dB |
Alignment hint
| EBP | 117 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 27.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 18NXB1601 | 34.6 +0.6 | 0.286 = | 146.2 -2.8 | 8.2 -0.8 | 96.9 -0.4 | close | Xmax 8.2 mm < 9 mm: lower excursion-limited SPL | + |
| B&C 18DS100 | 34 = | 0.29 +0.01 | 155 +6 | 14.5 +5.5 | 97.5 +0.2 | close | + | |
| B&C 18SW115 | 34 = | 0.3 +0.02 | 149.1 +0.1 | 14 +5 | 96 -1.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Oberton 18NXB700 | 36.24 +2.24 | 0.312 +0.03 | 155.46 +6.46 | 9 = | 98 +0.7 | close | 1000 W vs 1800 W: lower power handling | + |
| Oberton 18XB1300 | 35.2 +1.2 | 0.287 +0.01 | 170.9 +21.9 | 8 -1 | 97.8 +0.5 | close | 1300 W vs 1800 W: lower power handling · Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| B&C 18PZB100 | 38 +4 | 0.28 = | 164 +15 | 8 -1 | 96.5 -0.8 | close | 4 Ω vs 8 Ω: amp load changes · 700 W vs 1800 W: lower power handling · Xmax 8 mm < 9 mm: lower excursion-limited SPL | + |
| Oberton 18XB1301DS | 35.7 +1.7 | 0.302 +0.02 | 172.9 +23.9 | 12 +3 | 97.5 +0.2 | close | 1300 W vs 1800 W: lower power handling | + |
| Celestion CF18VJD | 34.3 +0.3 | 0.336 +0.05 | 150.6 +1.6 | 9 = | 95.5 -1.8 | close | + | |
| PD PD 1845-1N | 34.1 +0.1 | 0.323 +0.04 | 176 +27 | 9.5 +0.5 | 97.5 +0.2 | close | + | |
| Precision Devices PD 1845-1N | 34.1 +0.1 | 0.323 +0.04 | 176 +27 | 9.5 +0.5 | 97.5 +0.2 | close | + |
Compare the closest 3 against the 18NLW9600 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.