18 Sound 18NLW9000
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 34 Hz |
| Qts | 0.31 |
| Qes | 0.32 |
| Qms | 7 |
| Vas | 206 L |
| Sd | 1222 cm² |
| Xmax | 14 mm |
| Re | 5.5 Ω |
| Bl | 28 T·m |
| Mms | 218 g |
| Pe | 1800 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 106 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 49 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 18XL1600 | 32 -2 | 0.31 = | 201.1 -4.9 | 12.92 -1.08 | 98 +1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 12.92 mm < 14 mm: lower excursion-limited SPL | + |
| B&C 18SW115 | 32 -2 | 0.3 -0.01 | 187 -19 | 14 = | 97 = | close | + | |
| Oberton 18NXB1600 | 32.37 -1.63 | 0.303 -0.01 | 173.11 -32.89 | 13.5 -0.5 | 97 = | close | Xmax 13.5 mm < 14 mm: lower excursion-limited SPL | + |
| RCF LF18N405 | 30 -4 | 0.32 +0.01 | 227 +21 | 14 = | 97 = | close | + | |
| Fane IMPERIUM 18NDXL | 33 -1 | 0.295 -0.02 | 203 -3 | 12 -2 | 95.7 -1.3 | close | 1200 W vs 1800 W: lower power handling · Xmax 12 mm < 14 mm: lower excursion-limited SPL | + |
| 18 Sound 18LW2420 | 34 = | 0.31 = | 208 +2 | 10 -4 | 98 +1 | close | 4 Ω vs 8 Ω: amp load changes · 1300 W vs 1800 W: lower power handling · Xmax 10 mm < 14 mm: lower excursion-limited SPL | + |
| RCF LF18N408 | 30 -4 | 0.33 +0.02 | 193 -13 | 15 +1 | 97 = | close | + | |
| 18 Sound 18LW2600 | 31 -3 | 0.29 -0.02 | 187 -19 | 14.8 +0.8 | 96.8 -0.2 | close | + | |
| Faital PRO 18HW1070 | 32 -2 | 0.33 +0.02 | 191.5 -14.5 | 13 -1 | 96 -1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 13 mm < 14 mm: lower excursion-limited SPL | + |
| RCF LF18X451 | 30 -4 | 0.28 -0.03 | 220 +14 | 14 = | 97 = | close | + |
Compare the closest 3 against the 18NLW9000 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.