← all drivers

18 Sound 18NLW9000

18" · 4 Ω · 1800 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size18"
Impedance4 Ω
Fs32 Hz
Qts0.21
Qes0.22
Qms5
Vas247 L
Sd1222 cm²
Xmax14 mm
Re3.1 Ω
Bl25 T·m
Mms228 g
Pe1800 W
Sensitivity97 dB

Alignment hint

EBP145 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 23.9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Precision Devices PD185030 -20.21 =249 +216 +298 +1close8 Ω vs 4 Ω: amp load changes · 800 W vs 1800 W: lower power handling+
Beyma 18QLEX1600Fe30 -20.23 +0.02195 -5213 -197 =close8 Ω vs 4 Ω: amp load changes · Xmax 13 mm < 14 mm: lower excursion-limited SPL+
Oberton 18NSW70030.48 -1.520.243 +0.03309.02 +62.0214 =97.5 +0.5usable8 Ω vs 4 Ω: amp load changes · 700 W vs 1800 W: lower power handling+
Precision Devices PD.185C003-833 +10.24 +0.03224 -2311 -397.3 +0.3usable8 Ω vs 4 Ω: amp load changes · 1000 W vs 1800 W: lower power handling · Xmax 11 mm < 14 mm: lower excursion-limited SPL+
18 Sound 18NLW940032 =0.22 +0.01278 +319.5 -4.598 +1usable1200 W vs 1800 W: lower power handling · Xmax 9.5 mm < 14 mm: lower excursion-limited SPL+
RCF LF18N45131 -10.24 +0.03245 -29 -597.5 +0.5usable8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 14 mm: lower excursion-limited SPL+
Precision Devices PD.1850/233.1 +1.10.24 +0.03203.84 -43.1611.1 -2.996.7 -0.3usable8 Ω vs 4 Ω: amp load changes · 800 W vs 1800 W: lower power handling · Xmax 11.1 mm < 14 mm: lower excursion-limited SPL+
B&C 18DS11530 -20.2 -0.01168 -7916.5 +2.598 +1usable8 Ω vs 4 Ω: amp load changes+
RCF LF18X45130 -20.28 +0.07220 -2714 =97 =usable8 Ω vs 4 Ω: amp load changes+
Faital PRO 18XL200028 -40.27 +0.06232.1 -14.916.32 +2.3297 =usable8 Ω vs 4 Ω: amp load changes+

Compare the closest 3 against the 18NLW9000 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.