18 Sound 15W750
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 39 Hz |
| Qts | 0.37 |
| Qes | 0.39 |
| Qms | 9.34 |
| Vas | 218 L |
| Sd | 850 cm² |
| Xmax | 8 mm |
| Re | 5.1 Ω |
| Bl | 17.6 T·m |
| Mms | 88 g |
| Pe | 600 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 82.2 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 15FH500A | 35 -4 | 0.394 +0.02 | 217.4 -0.6 | 9 +1 | 97.1 +0.1 | close | + | |
| 18 Sound 15ND930 | 38 -1 | 0.39 +0.02 | 195 -23 | 7.5 -0.5 | 97 = | close | 16 Ω vs 8 Ω: amp load changes · Xmax 7.5 mm < 8 mm: lower excursion-limited SPL | + |
| SICA 15 S 3 PL 8 Ohms | 33 -6 | 0.38 +0.01 | 230 +12 | 8 = | 97.1 +0.1 | close | 400 W vs 600 W: lower power handling | + |
| Beyma 15LX60 | 35 -4 | 0.346 -0.02 | 215 -3 | 9 +1 | 97.7 +0.7 | close | + | |
| Sica 15 S 3 PL | 33 -6 | 0.38 +0.01 | 230 +12 | 8 = | 97.2 +0.2 | close | 400 W vs 600 W: lower power handling | + |
| Eminence Kl3015CX-8 vp | 38 -1 | 0.438 +0.07 | 219.7 +1.7 | 7.8 -0.2 | 97.5 +0.5 | close | 400 W vs 600 W: lower power handling · Xmax 7.8 mm < 8 mm: lower excursion-limited SPL | + |
| Volt RV4504 | 33 -6 | 0.349 -0.02 | 217 -1 | 9.2 +1.2 | 96.7 -0.3 | close | + | |
| Celestion TF1530E | 41 +2 | 0.344 -0.03 | 181.7 -36.3 | 8 = | 97.1 +0.1 | close | 400 W vs 600 W: lower power handling | + |
| Oxygen JET 18 | 32.9 -6.1 | 0.349 -0.02 | 217 -1 | 10 +2 | 96.7 -0.3 | close | + | |
| Fane SOVEREIGN PRO 15-600 LF | 40 +1 | 0.364 -0.01 | 188 -30 | 6.9 -1.1 | 97.9 +0.9 | close | Xmax 6.9 mm < 8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15W750 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.