← all drivers

18 Sound 15W750

15" · 16 Ω · 600 W · 98 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance16 Ω
Fs40 Hz
Qts0.42
Qes0.44
Qms7.7
Vas182 L
Sd850 cm²
Xmax8 mm
Re10.25 Ω
Bl23.5 T·m
Mms94 g
Pe600 W
Sensitivity98 dB

Alignment hint

EBP91 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 99.2 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
BMS 15N63039 -10.42 =152 -308 =98 =close8 Ω vs 16 Ω: amp load changes+
Cyrille Audio GM38F76P38.8 -1.20.419 =192.6 +10.66.6 -1.497.7 -0.3close8 Ω vs 16 Ω: amp load changes · 350 W vs 600 W: lower power handling · Xmax 6.6 mm < 8 mm: lower excursion-limited SPL+
B&C 15 FCX 7640 =0.445 +0.03187 +56.5 -1.597.9 -0.1close8 Ω vs 16 Ω: amp load changes · 400 W vs 600 W: lower power handling · Xmax 6.5 mm < 8 mm: lower excursion-limited SPL+
Beyma SM11542 +20.405 -0.01185 +36.7 -1.398.2 +0.2close8 Ω vs 16 Ω: amp load changes · 400 W vs 600 W: lower power handling · Xmax 6.7 mm < 8 mm: lower excursion-limited SPL+
Faital PRO 15FH52036 -40.39 -0.03186.5 +4.58.75 +0.7598 =close8 Ω vs 16 Ω: amp load changes+
Beyma 15CXA400Fe40 =0.419 =191 +96 -297.6 -0.4close8 Ω vs 16 Ω: amp load changes · 400 W vs 600 W: lower power handling · Xmax 6 mm < 8 mm: lower excursion-limited SPL+
Faital PRO 15FH520 v202536 -40.394 -0.03186.5 +4.58.8 +0.896.8 -1.2close8 Ω vs 16 Ω: amp load changes+
BMS 15N630 v201539 -10.422 =152 -307.8 -0.296.2 -1.8close8 Ω vs 16 Ω: amp load changes · Xmax 7.8 mm < 8 mm: lower excursion-limited SPL+
18 Sound 15ND93038 -20.39 -0.03195 +137.5 -0.597 -1closeXmax 7.5 mm < 8 mm: lower excursion-limited SPL+
Eminence KILOMAX PRO 1541 +10.383 -0.04154.5 -27.57.9 -0.198.3 +0.3close8 Ω vs 16 Ω: amp load changes · Xmax 7.9 mm < 8 mm: lower excursion-limited SPL+

Compare the closest 3 against the 15W750 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.