18 Sound 15NMB1000
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 46 Hz |
| Qts | 0.24 |
| Qes | 0.24 |
| Qms | 8.3 |
| Vas | 124 L |
| Sd | 855 cm² |
| Xmax | 6.5 mm |
| Re | 5.3 Ω |
| Bl | 25.2 T·m |
| Mms | 100 g |
| Pe | 900 W |
| Sensitivity | 101 dB |
Alignment hint
| EBP | 192 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF MB 15N405 | 46 = | 0.265 +0.03 | 124 = | 6.6 +0.1 | 100 -1 | close | + | |
| Oberton 15NB500 | 42.77 -3.23 | 0.255 +0.02 | 121.46 -2.54 | 7.25 +0.75 | 99 -2 | close | 500 W vs 900 W: lower power handling | + |
| 18 Sound 15LW1400 | 42 -4 | 0.245 +0.01 | 137 +13 | 6.7 +0.2 | 99.3 -1.7 | close | + | |
| B&C 15NW76 | 42 -4 | 0.22 -0.02 | 130 +6 | 8 +1.5 | 100.5 -0.5 | close | 600 W vs 900 W: lower power handling | + |
| PHL Audio 6031 | 41 -5 | 0.236 = | 117 -7 | 6.3 -0.2 | 98.6 -2.4 | close | Xmax 6.3 mm < 6.5 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 15-750BMN | 45 -1 | 0.27 +0.03 | 127 +3 | 5.8 -0.7 | 99.6 -1.4 | close | Xmax 5.8 mm < 6.5 mm: lower excursion-limited SPL | + |
| Oberton 15NMB500 | 44.74 -1.26 | 0.292 +0.05 | 127.95 +3.95 | 7.75 +1.25 | 100.5 -0.5 | close | 500 W vs 900 W: lower power handling | + |
| 18 Sound 15LW1401 4 Ohms | 39 -7 | 0.26 +0.02 | 127 +3 | 7.4 +0.9 | 100 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 15P80/FE | 41 -5 | 0.236 = | 159.3 +35.3 | 6.6 +0.1 | 100.6 -0.4 | close | + | |
| B&C 14 CXN 6 | 45 -1 | 0.28 +0.04 | 131 +7 | 5.6 -0.9 | 100 -1 | close | 400 W vs 900 W: lower power handling · Xmax 5.6 mm < 6.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15NMB1000 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.