18 Sound 15NLW9300 v2015
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 39 Hz |
| Qts | 0.263 |
| Qes | 0.274 |
| Qms | 6.7 |
| Vas | 170 L |
| Sd | 900 cm² |
| Xmax | 7.2 mm |
| Re | 6 Ω |
| Bl | 24.4 T·m |
| Mms | 111.2 g |
| Pe | 800 W |
| Sensitivity | 98.9 dB |
Alignment hint
| EBP | 142 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 27.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 15ND940 | 39 = | 0.26 = | 170 = | 9.5 +2.3 | 99 +0.1 | close | 4 Ω vs 8 Ω: amp load changes · 600 W vs 800 W: lower power handling | + |
| B&C 15PS76-8 | 38 -1 | 0.26 = | 164 -6 | 7.5 +0.3 | 99 +0.1 | close | 550 W vs 800 W: lower power handling | + |
| 18 Sound 15NLW9300 | 39 = | 0.26 = | 170 = | 8 +0.8 | 97 -1.9 | close | + | |
| B&C 15 PS 76 | 38 -1 | 0.266 = | 164 -6 | 6.3 -0.9 | 98.9 = | close | 550 W vs 800 W: lower power handling · Xmax 6.3 mm < 7.2 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 15XBN | 38 -1 | 0.279 +0.02 | 168 -2 | 7.5 +0.3 | 98.1 -0.8 | close | + | |
| RCF L 15P400 | 36 -3 | 0.261 = | 160 -10 | 7.2 = | 98.6 -0.3 | close | + | |
| BMS 15N830V2 v2015 | 37 -2 | 0.271 +0.01 | 159 -11 | 7.5 +0.3 | 98.6 -0.3 | close | + | |
| 18 Sound 15ND940 | 38 -1 | 0.28 +0.02 | 174 +4 | 9.5 +2.3 | 99 +0.1 | close | 600 W vs 800 W: lower power handling | + |
| Oberton 15B500 | 38.2 -0.8 | 0.268 +0.01 | 145.82 -24.18 | 7.25 +0.05 | 99 +0.1 | close | 500 W vs 800 W: lower power handling | + |
| Sica 15 K 3 PL | 40 +1 | 0.27 +0.01 | 166.1 -3.9 | 6.5 -0.7 | 99.7 +0.8 | close | 400 W vs 800 W: lower power handling · Xmax 6.5 mm < 7.2 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15NLW9300 v2015 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.