18 Sound 15ND830
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 42 Hz |
| Qts | 0.34 |
| Qes | 0.36 |
| Qms | 7.2 |
| Vas | 157 L |
| Sd | 850 cm² |
| Xmax | 6.5 mm |
| Re | 3 Ω |
| Bl | 14 T·m |
| Mms | 85 g |
| Pe | 450 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 117 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 47.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 15MC700 | 41 -1 | 0.352 +0.01 | 153 -4 | 7.4 +0.9 | 97.7 -0.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PD PD 15BR40 | 38.7 -3.3 | 0.34 = | 158.3 +1.3 | 7.9 +1.4 | 98.1 +0.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PD 15BR40 | 38.7 -3.3 | 0.34 = | 158.3 +1.3 | 7.9 +1.4 | 98.1 +0.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH500 vp3 | 40.8 -1.2 | 0.343 = | 141.8 -15.2 | 6.7 +0.2 | 98.2 +0.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH500 vp2 | 40 -2 | 0.335 -0.01 | 146.9 -10.1 | 6.7 +0.2 | 98.3 +0.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 15MCB700 | 44 +2 | 0.34 = | 148 -9 | 7 +0.5 | 99 +1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Oberton 15MB500 | 41.5 -0.5 | 0.339 = | 161.54 +4.54 | 7.75 +1.25 | 100 +2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| BMS 15N620 v2015 | 41 -1 | 0.348 +0.01 | 154 -3 | 5.5 -1 | 98 = | close | 8 Ω vs 4 Ω: amp load changes · Xmax 5.5 mm < 6.5 mm: lower excursion-limited SPL | + |
| LaVoce NBASS15-30 | 42 = | 0.36 +0.02 | 143.06 -13.94 | 6.6 +0.1 | 98.5 +0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH500 vp1 | 40 -2 | 0.328 -0.01 | 146.1 -10.9 | 6.7 +0.2 | 98.4 +0.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 15ND830 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.