18 Sound 15LW1402
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 42 Hz |
| Qts | 0.28 |
| Qes | 0.29 |
| Qms | 8.1 |
| Vas | 126 L |
| Sd | 900 cm² |
| Xmax | 7 mm |
| Re | 5.9 Ω |
| Bl | 26.4 T·m |
| Mms | 129.4 g |
| Pe | 1000 W |
| Sensitivity | 98.4 dB |
Alignment hint
| EBP | 145 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 15LW1410 | 42 = | 0.27 -0.01 | 131 +5 | 8.5 +1.5 | 98.5 +0.1 | close | + | |
| 18 Sound 15LW1401 | 42 = | 0.27 -0.01 | 131 +5 | 9 +2 | 98 -0.4 | close | + | |
| Faital PRO 15HP1020 | 40 -2 | 0.27 -0.01 | 126.6 +0.6 | 9 +2 | 98 -0.4 | close | 700 W vs 1000 W: lower power handling | + |
| B&C 14 NDL 76 | 41 -1 | 0.299 +0.02 | 123 -3 | 6.5 -0.5 | 98.4 = | close | 500 W vs 1000 W: lower power handling · Xmax 6.5 mm < 7 mm: lower excursion-limited SPL | + |
| Oberton 15XL701 | 45.25 +3.25 | 0.28 = | 116.99 -9.01 | 8.75 +1.75 | 98 -0.4 | close | 700 W vs 1000 W: lower power handling | + |
| B&C 15 TBX 40 | 38 -4 | 0.277 = | 131 +5 | 7.8 +0.8 | 97.8 -0.6 | close | + | |
| Oberton 15NXL701 | 43.4 +1.4 | 0.3 +0.02 | 127.09 +1.09 | 9.25 +2.25 | 99 +0.6 | close | 700 W vs 1000 W: lower power handling | + |
| Oberton 15NB500 | 42.77 +0.77 | 0.255 -0.03 | 121.46 -4.54 | 7.25 +0.25 | 99 +0.6 | close | 500 W vs 1000 W: lower power handling | + |
| Precision Devices 900 Series PD915 | 42.9 +0.9 | 0.28 = | 129.52 +3.52 | 6 -1 | 97 -1.4 | close | 600 W vs 1000 W: lower power handling · Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| BMS 15S435 | 38 -4 | 0.28 = | 129 +3 | 8 +1 | 97 -1.4 | close | + |
Compare the closest 3 against the 15LW1402 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.