18 Sound 15LW1400
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 42 Hz |
| Qts | 0.245 |
| Qes | 0.26 |
| Qms | 4.36 |
| Vas | 137 L |
| Sd | 890 cm² |
| Xmax | 6.7 mm |
| Re | 5.8 Ω |
| Bl | 26.2 T·m |
| Mms | 116.4 g |
| Pe | 1000 W |
| Sensitivity | 99.3 dB |
Alignment hint
| EBP | 162 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 18.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 15CL76 | 42 = | 0.25 +0.01 | 140 +3 | 7 +0.3 | 98 -1.3 | close | 4 Ω vs 8 Ω: amp load changes · 400 W vs 1000 W: lower power handling | + |
| P.Audio P-15N | 39.8 -2.2 | 0.254 +0.01 | 144.6 +7.6 | 7.5 +0.8 | 99.2 -0.1 | close | + | |
| Oberton 15NB451 | 39.57 -2.43 | 0.257 +0.01 | 145.21 +8.21 | 7 +0.3 | 99 -0.3 | close | 450 W vs 1000 W: lower power handling | + |
| Oberton 15NB500 | 42.77 +0.77 | 0.255 +0.01 | 121.46 -15.54 | 7.25 +0.55 | 99 -0.3 | close | 500 W vs 1000 W: lower power handling | + |
| 18 Sound 15LW1410 | 42 = | 0.27 +0.03 | 131 -6 | 8.5 +1.8 | 98.5 -0.8 | close | + | |
| B&C 15NW76 | 42 = | 0.22 -0.02 | 130 -7 | 8 +1.3 | 100.5 +1.2 | close | 600 W vs 1000 W: lower power handling | + |
| 18 Sound 15LW1401 4 Ohms | 39 -3 | 0.26 +0.02 | 127 -10 | 7.4 +0.7 | 100 +0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 15LW1401 | 42 = | 0.27 +0.03 | 131 -6 | 9 +2.3 | 98 -1.3 | close | + | |
| Beyma 15P80/FE | 41 -1 | 0.236 -0.01 | 159.3 +22.3 | 6.6 -0.1 | 100.6 +1.3 | close | Xmax 6.6 mm < 6.7 mm: lower excursion-limited SPL | + |
| PHL Audio 6031 | 41 -1 | 0.236 -0.01 | 117 -20 | 6.3 -0.4 | 98.6 -0.7 | close | Xmax 6.3 mm < 6.7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15LW1400 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.