18 Sound 12MB600
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 46 Hz |
| Qts | 0.19 |
| Qes | 0.19 |
| Qms | 4.89 |
| Vas | 86 L |
| Sd | 531 cm² |
| Xmax | 4.5 mm |
| Re | 2.7 Ω |
| Bl | 14.9 T·m |
| Mms | 56 g |
| Pe | 450 W |
| Sensitivity | 101 dB |
Alignment hint
| EBP | 242 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 12MB710 | 46 = | 0.2 +0.01 | 81 -5 | 5 +0.5 | 100 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 12MB720 | 46 = | 0.2 +0.01 | 81 -5 | 5 +0.5 | 100 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 12MB810 | 46 = | 0.2 +0.01 | 81 -5 | 5 +0.5 | 100 -1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 12MB700 | 49 +3 | 0.19 = | 101 +15 | 4.5 = | 101.5 +0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| 18 Sound 12MB777 | 49 +3 | 0.19 = | 101 +15 | 4.5 = | 101.5 +0.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 12P80/Fe | 46 = | 0.186 = | 75.6 -10.4 | 5.6 +1.1 | 99.8 -1.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PHL Audio 4050 | 49 +3 | 0.197 +0.01 | 84 -2 | 4.1 -0.4 | 100.1 -0.9 | close | 8 Ω vs 4 Ω: amp load changes · 350 W vs 450 W: lower power handling · Xmax 4.1 mm < 4.5 mm: lower excursion-limited SPL | + |
| Oberton 12NXL400 | 48.6 +2.6 | 0.203 +0.01 | 79.24 -6.76 | 5.25 +0.75 | 101 = | close | 8 Ω vs 4 Ω: amp load changes | + |
| PHL Audio 4040 | 45 -1 | 0.208 +0.02 | 85 -1 | 4.9 +0.4 | 99.1 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| PD PD 122 | 42.9 -3.1 | 0.196 +0.01 | 90 +4 | 4.7 +0.2 | 98.8 -2.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 12MB600 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.