← all drivers

18 Sound 10NW750

10" · 8 Ω · 450 W · 94 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs53 Hz
Qts0.31
Qes0.32
Qms5.74
Vas34 L
Sd340 cm²
Xmax7.5 mm
Re5.8 Ω
Bl16.4 T·m
Mms45 g
Pe450 W
Sensitivity94 dB

Alignment hint

EBP166 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 8.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma 10MW/ND49 -40.32 +0.0140.7 +6.77.5 =93.5 -0.5close6 Ω vs 8 Ω: amp load changes · 350 W vs 450 W: lower power handling+
SICA 10 S 3 CP 8 Ohms48 -50.323 +0.0132.4 -1.66.1 -1.494 =closeXmax 6.1 mm < 7.5 mm: lower excursion-limited SPL+
18 Sound 10NW75052 -10.36 +0.0538 +47.1 -0.494 =close16 Ω vs 8 Ω: amp load changes · Xmax 7.1 mm < 7.5 mm: lower excursion-limited SPL+
Faital PRO 10PR33060 +70.33 +0.0232.5 -1.57.37 -0.1396 +2close300 W vs 450 W: lower power handling · Xmax 7.37 mm < 7.5 mm: lower excursion-limited SPL+
Beyma 10G4055 +20.314 =33 -15 -2.595.4 +1.4closeXmax 5 mm < 7.5 mm: lower excursion-limited SPL+
Faital PRO 10PR33060 +70.36 +0.0532.9 -1.17.27 -0.2395 +1close16 Ω vs 8 Ω: amp load changes · 300 W vs 450 W: lower power handling · Xmax 7.27 mm < 7.5 mm: lower excursion-limited SPL+
SICA 10 S 3 CP v201743 -100.313 =39.9 +5.97 -0.593.6 -0.4closeXmax 7 mm < 7.5 mm: lower excursion-limited SPL+
Volt B250.2 PA50 -30.314 =33 -14.6 -2.994.4 +0.4close250 W vs 450 W: lower power handling · Xmax 4.6 mm < 7.5 mm: lower excursion-limited SPL+
Beyma 10MW/ND v249 -40.319 +0.0140.7 +6.76.1 -1.494.8 +0.8usable350 W vs 450 W: lower power handling · Xmax 6.1 mm < 7.5 mm: lower excursion-limited SPL+
B&C 10 PS 2654 +10.296 -0.0138 +45.5 -296 +2usable350 W vs 450 W: lower power handling · Xmax 5.5 mm < 7.5 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10NW750 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.