18 Sound 10NTLW2500
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 65 Hz |
| Qts | 0.33 |
| Qes | 0.34 |
| Qms | 11.2 |
| Vas | 21 L |
| Sd | 346.4 cm² |
| Xmax | 7.6 mm |
| Re | 5 Ω |
| Bl | 17.4 T·m |
| Mms | 49 g |
| Pe | 500 W |
| Sensitivity | 96.5 dB |
Alignment hint
| EBP | 191 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10MCS 500 | 65 = | 0.31 -0.02 | 24 +3 | 8 +0.4 | 96.5 = | close | + | |
| 18 Sound 10NTLW2500 | 66 +1 | 0.39 +0.06 | 20.9 -0.1 | 7.6 = | 96 -0.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FH520 | 60 -5 | 0.32 -0.01 | 22.7 +1.7 | 7.25 -0.35 | 95 -1.5 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 7.6 mm: lower excursion-limited SPL | + |
| Beyma 10MC500 | 65 = | 0.29 -0.04 | 24 +3 | 8 +0.4 | 97 +0.5 | close | + | |
| Faital PRO 10FH530 | 67 +2 | 0.39 +0.06 | 20.2 -0.8 | 7.45 -0.15 | 96 -0.5 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 7.45 mm < 7.6 mm: lower excursion-limited SPL | + |
| 18 Sound 10NTLW2500 | 61 -4 | 0.27 -0.06 | 22 +1 | 7.6 = | 96.5 = | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 10NDL88 | 67 +2 | 0.32 -0.01 | 15.6 -5.4 | 7.8 +0.2 | 95.5 -1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 10NTLW3500 | 65 = | 0.35 +0.02 | 16 -5 | 7.9 +0.3 | 95 -1.5 | close | + | |
| B&C 10NW76 | 68 +3 | 0.29 -0.04 | 18.5 -2.5 | 7 -0.6 | 96.8 +0.3 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 7 mm < 7.6 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH520 | 60 -5 | 0.29 -0.04 | 23.5 +2.5 | 7.25 -0.35 | 97 +0.5 | close | Xmax 7.25 mm < 7.6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10NTLW2500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.