18 Sound 10NMB520
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 64 Hz |
| Qts | 0.33 |
| Qes | 0.36 |
| Qms | 4 |
| Vas | 43 L |
| Sd | 340 cm² |
| Xmax | 4 mm |
| Re | 11.7 Ω |
| Bl | 17.5 T·m |
| Mms | 23 g |
| Pe | 300 W |
| Sensitivity | 100 dB |
Alignment hint
| EBP | 178 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 12 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PHL Audio 3020 | 60 -4 | 0.337 +0.01 | 41 -2 | 4.1 +0.1 | 97.6 -2.4 | close | 8 Ω vs 16 Ω: amp load changes · 200 W vs 300 W: lower power handling | + |
| Fane SOVEREIGN 10-275 | 60 -4 | 0.343 +0.01 | 42.4 -0.6 | 5 +1 | 97.5 -2.5 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Fane SOVEREIGN 10-300 | 58 -6 | 0.313 -0.02 | 43 = | 4.8 +0.8 | 97.5 -2.5 | close | 8 Ω vs 16 Ω: amp load changes | + |
| RCF MB 10N251 (prodance) | 58.9 -5.1 | 0.33 = | 38.8 -4.2 | 4.8 +0.8 | 97.3 -2.7 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Fane SOVEREIGN PRO 10-300 | 58 -6 | 0.322 -0.01 | 41 -2 | 4.7 +0.7 | 97.2 -2.8 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence DELTA 10B | 65 +1 | 0.33 = | 36 -7 | 3.5 -0.5 | 98 -2 | close | Xmax 3.5 mm < 4 mm: lower excursion-limited SPL | + |
| SICA 10 L 2.5 SL 4 Ohms | 56.5 -7.5 | 0.295 -0.04 | 46.9 +3.9 | 4 = | 99.8 -0.2 | close | 4 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 10NMB420 | 65 +1 | 0.33 = | 30 -13 | 4 = | 99 -1 | close | + | |
| Beyma 10XC25 | 63 -1 | 0.376 +0.05 | 41 -2 | 4.5 +0.5 | 97.2 -2.8 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Jensen JB 10/150 | 60 -4 | 0.295 -0.04 | 42 -1 | 3.7 -0.3 | 97.8 -2.2 | close | 8 Ω vs 16 Ω: amp load changes · 150 W vs 300 W: lower power handling · Xmax 3.7 mm < 4 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10NMB520 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.