18 Sound 10NMB420 vp
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 67.3 Hz |
| Qts | 0.272 |
| Qes | 0.29 |
| Qms | 4.35 |
| Vas | 33 L |
| Sd | 361.2 cm² |
| Xmax | 4 mm |
| Re | 5.25 Ω |
| Bl | 15.4 T·m |
| Mms | 31 g |
| Pe | 350 W |
| Sensitivity | 99.2 dB |
Alignment hint
| EBP | 232 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF CX 10g251 | 72 +4.7 | 0.283 +0.01 | 33 = | 3.8 -0.2 | 100 +0.8 | close | Xmax 3.8 mm < 4 mm: lower excursion-limited SPL | + |
| Faital PRO 10HX240 | 65 -2.3 | 0.275 = | 31.8 -1.2 | 3.5 -0.5 | 98.4 -0.8 | close | 250 W vs 350 W: lower power handling · Xmax 3.5 mm < 4 mm: lower excursion-limited SPL | + |
| B&C 10MBX64 | 65 -2.3 | 0.26 -0.01 | 28 -5 | 4 = | 100 +0.8 | close | + | |
| Eminence KAPPALITE 3010 H0 | 61.4 -5.9 | 0.263 -0.01 | 37.2 +4.2 | 4.4 +0.4 | 98.7 -0.5 | close | + | |
| B&C 10MBX64 | 65 -2.3 | 0.3 +0.03 | 30 -3 | 4 = | 100 +0.8 | close | 16 Ω vs 8 Ω: amp load changes | + |
| SB Audience BIANCO-10MW150 | 60 -7.3 | 0.293 +0.02 | 34.6 +1.6 | 4.3 +0.3 | 97.8 -1.4 | close | + | |
| PHL Audio 3000 | 60 -7.3 | 0.272 = | 35 +2 | 3.4 -0.6 | 97.8 -1.4 | close | 200 W vs 350 W: lower power handling · Xmax 3.4 mm < 4 mm: lower excursion-limited SPL | + |
| SICA 10K3PL | 56 -11.3 | 0.276 = | 32.6 -0.4 | 4 = | 96.7 -2.5 | close | + | |
| SICA 10 K 3 PL 4 Ohms | 56 -11.3 | 0.265 -0.01 | 29.2 -3.8 | 4 = | 98.9 -0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| SICA 10 K 3 PL 8 Ohms | 55.9 -11.4 | 0.276 = | 32.6 -0.4 | 4 = | 96.7 -2.5 | close | + |
Compare the closest 3 against the 10NMB420 vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.