18 Sound 10KW3 KEYBASS vp

10" · 16 Ω · 100 W · 97.1 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	16 Ω
Fs	71 Hz
Qts	0.473
Qes	0.5
Qms	8.8
Vas	45.2 L
Sd	380 cm²
Xmax	1.5 mm
Re	8 Ω
Bl	12.7 T·m
Mms	22.5 g
Pe	100 W
Sensitivity	97.1 dB

Alignment hint

EBP	142 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 36.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Audax PR24LXT100	63 -8	0.474 =	46 +0.8	3 +1.5	95.5 -1.6	close	8 Ω vs 16 Ω: amp load changes	+
Hyper Phase CM10	65 -6	0.511 +0.04	45 -0.2	3.3 +1.8	95.6 -1.5	close	8 Ω vs 16 Ω: amp load changes	+
Celestion K10-200E	67 -4	0.471 =	37 -8.2	4 +2.5	97.3 +0.2	close	8 Ω vs 16 Ω: amp load changes	+
Monacor SPA-25PA	60 -11	0.422 -0.05	41 -4.2	1.5 =	95.8 -1.3	usable	8 Ω vs 16 Ω: amp load changes	+
Eminence GAMMA 10	63 -8	0.51 +0.04	36.4 -8.8	1.6 +0.1	95.9 -1.2	usable	8 Ω vs 16 Ω: amp load changes	+
JBL 2120	65 -6	0.364 -0.11	45.3 +0.1	1.5 =	98.2 +1.1	usable	8 Ω vs 16 Ω: amp load changes · 75 W vs 100 W: lower power handling	+
Monacor SPA-110PA	61 -10	0.469 =	38 -7.2	4 +2.5	96.3 -0.8	usable	8 Ω vs 16 Ω: amp load changes	+
Eminence BASSLITE CH2010	58 -13	0.438 -0.03	43 -2.2	3.5 +2	96.2 -0.9	usable	8 Ω vs 16 Ω: amp load changes	+
LaVoce WSF101.82	64 -7	0.4 -0.07	41.6 -3.6	3.6 +2.1	97.4 +0.3	usable	8 Ω vs 16 Ω: amp load changes	+
Radian CRS1030	65 -6	0.472 =	35.3 -9.9	5.5 +4	96.2 -0.9	usable	8 Ω vs 16 Ω: amp load changes	+

Compare the closest 3 against the 10KW3 KEYBASS vp →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.